Table of Contents
Advertisement
Install Adapter Sleeve
Choose an adapter sleeve that is compatible with the post, stake or rod being driven. It is recommended to use the
smallest compatible adapter sleeve. This will help ensure efficient energy transfer and keep the driven material in
the center of the barrel. To install an adapter sleeve, simply remove the barrel cap, insert the sleeve, and
reinstall/tighten the barrel cap. Try to limit use of the driver without the barrel cap installed, as this can cause
permanent damage to the barrel threads. Always hand tighten the barrel cap before use.
o Using a driver without a suitable adapter sleeve can cause
non-warrantable damage to the driver.
Add Fuel
o Never refill the engine with gasoline while the driver is running or hot,
or near an open flame.
Please read the safety precautions regarding fuel in the Safety Precautions section.
1. Only use unleaded gasoline of 86 octane or greater.
2. Add fuel in the area away from open fire and well ventilated.
3. The gasoline engine should be cooled to the ambient temperature before refueling.
4. Do not over fill fuel tank. Do not fill past bottom of fuel tank neck. If fuel spills, wait until the fuel volatilizes
completely before starting the machine.
5. Tighten the Fuel Cap after refueling.
6. The engine is a four-stroke engine – do NOT mix fuel.
Inspection of Air filter
1. Remove the air filter cover and check that the filter element is clean. If the filter element is dirty, clean or replace
the filter element.
2. After inspection, install the air filter cover to its original position.
www.ChainLinkFittings.com | (800) 878-7829 | Sales@ChainLinkFittings.com
5
Advertisement
Table of Contents
