Advertisement
11
12
13
14
Auto Iris Lens Connector
Supplies the power and either. the video signal or
DC control signal to the Auto Iris Lens.
The 4-pin connector for the lens which originally
has
different
type
of connector
is a standard
accessory (Part No. YFE4191J100).
Power Indicator
Gen-lock Termination Switch
(G/L 750hms, ON/OFF)
When
looping through
the gen-lock video input
signal, set this switch
to OFF
position and all
other cases, set this to ON position.
SYNC Selection Switch (INT, LL)
This switch is used to select the camera synchro-
nization mode,
INT : When
no signal is supplied to the GEN-
LOCK
connector,
the camera
synchro-
nization
mode
is set to
internal
2:1
interlace,
15
Whenever
the GENLOCK
video signal is
supplied
to the GENLOCK
connector,
the
camera
synchronization
mode _ is
automatically
set
to
external
synchro-
nization.
connector.
Flange-back Adjusting Ring
Used to adjust the back focus or picture focus by
rotating this ring to clockwise for C-mount lens or
counterclockwise for special C-mount (CS mount)
lens,
CAUTION: 1. Always set this ring to fully clock-
wise
before
mounting
the
lens.
2. Do not turn this ring too much
to counterclockwise
when
the C-
mount
lens
is mounted
as this
could damage the inner glass CCD
image sensor,
Advertisement
