Advertisement
Note : When the Lens Selection Switch (8) is set
to VIDEO
position, the auto iris control
level
should
be
adjusted
by the
lens.
AGC ON/OFF Switch (AGC ON/OFF)
This switch is used to select the gain of the video
amplifier as follows;
ON:
When
the lens iris is fully open at low
light shooting, a clear picture is obtained
by automatic increase of the gain.
OFF:
A natural and low-noise picture is obtain-
ed at low light shooting.
Gen-lock
Video
Input Connector
(GENLOCK)
A composite
B/W
or color, 1.0Vp-p/75 ohms
video signal, or black burst 0.3Vp-p/75 ohms or
composite sync, 4Vp-p/75 ohms should be sup-
plied to this connector for external synchroniza-
tion.
Video Output Connector (VIDEO)
A
composite
video
signal
is provided
at this
connector.
Camera ON/OFF Switch
Lens Selection Switch (AUTO IRIS, DC/VIDEO)
This switch is used to select the supplied auto iris
control signal to the lens from the Auto Iris Lens
10
Connector (11).
DC:
Choose this position when the auto iris
control
lens
requiring
DC
control
signal
such
as WV-LA4.5,
WV-LAG,
WV-LA12, WV-LA18, WV-LA36, WV-
LA6B2, WV-LA12B2 etc., is mounted
on the camera.
Choose this position when the auto iris
control lens requiring video signal such
as WV-LA8B, WV-LA16B,WV-LA25B,
WV-LA5OB
etc.,
is mounted
on
the
camera,
VIDEO :
Power Cord
AC 24V In Terminal Strip
Accepts AC 24V power source (19.5V - 28V).
Be sure to connect grounding lead to the GND
terminal,
To prevent
fire or shock
hazard, the UL
listed wire VW-1, style 1007 should be used
for the cable for AC 24V
Input Terminal.
Caution:
Advertisement
