Midea MLV47R5BWW User's Manual & Installation Instructions page 33

Top-load washer
Table of Contents

Advertisement

Available languages

Available languages

Caution
Never use the tub clean cycle when laundry is in your washer. This may
damage the laundry or your washer.
With the tub empty, add one cup of chlorine bleach to the bleach
dispenser.
Turn the control knob to power on.
Turn the cycle selector to Tub Clean. With the tub empty, add one
cup of chlorine bleach to the bleach dispenser.
Press the Start Pause button.
Storing your washer
You can damage your washer if you do not remove water from hoses
and internal components before storage.
To prepare your washer for storage:
Select the Quick Wash cycle and add bleach to the washer. Run
your washer through the cycle without a load.
Turn the water faucets off and disconnect the inlet hoses.
Unplug your washer from the electrical outlet and leave your
washer lid open to let air circulate inside the tub.
Caution
If your washer has been stored in below-freezing temperatures, allow
time for any leftover water in your washer to dry out before use.
33

Advertisement

Table of Contents
loading

Table of Contents