Midea MLV47R5BWW User's Manual & Installation Instructions page 20

Caution
Do not overtighten the fittings or apply tape or sealant to the faucets
or water supply intake. This can damage the fittings.
3. Place the unconnected ends of the hoses into a bucket and turn on
the faucets connected to the water supply hoses for 10 or 15 seconds
to remove any foreign substances. Turn off the faucets.
4. Connect the ends of the water supply hoses to the water supply
intake connections at the top of the washer. Make sure that the
rubber washers are in place. The water supply hose connected to the
hot faucet must be connected to the hot water supply intake and the
water hose connected to the cold faucet must be connected to the
cold water supply intake.
NOTE: If you do not want to use the hot water supply hose, insert a
water intake cap into the hot water supply intake hole. In this case you
must select the Tap Cold option for the water temperature.
NOTE: No intake cap is provided with your washer. It must be
purchased separately.
20