TATA Motors NEXON Owner's Manual page 206

3. Charge the smartphone without its
cover or not a thick cover otherwise it
would halt the wireless charging
4. Ensure that the phone is placed with
display facing upwards and charging
area touching the charging pad sur-
face.
5. Turn ON the ignition to start the charg-
ing.
INFORMATION
• The wireless charging function is sup-
ported to charge smart phones which
are Qi compatible. Certain features
may not function as not supported by
the smart phone manufacturer and not
a malfunction of the wireless charging.
• Wireless charging stops with Ignition
OFF.
• Wireless charging stops when the
smart phone is not completely in touch
with the charging pad surface or not
positioned correctly on charging pad
Do's and Don'ts
WARNING
1. If any metal object such as coin is lo-
cated between wireless charging pad
and phone back, the charging may get
disrupted. Also, metal object may heat
up.
Do's:
1. Please ensure that the phone is com-
patible to the charging standard "Qi".
2. If any metal object found on charging
pad remove it immediately.
3. In case of water/Liquid spillage on
charging pad, dry out the pad surface
area properly & clean the ECU surface
area by removing Anti-skid mat. Do not
charge the smart phone until surface is
completely dry.
4. The smart phone may become hot
while getting charged. Please be cau-
tious about the high temperature while
picking up the smartphone from the
charging pad.
INTERIOR FEATURES
5. Wireless charger works on principle of
magnetic induction, i.e. it converts
electrical energy into magnetic energy
to transfer energy from charging pad to
phone. Please maintain safe distance
from the charger most of the time as it
may cause irritation to sensory organs
or active implants if implemented in the
body. Please consult medical specialist
in case implant organ in the body of
the user
6. Always turn ON the engine while using
this feature to avoid vehicle battery
drain issue.
7. Always keep charging pad clean and
dust free.
8. Vehicle AC may turn ON during wire-
less mobile charging for efficient use of
this feature.
Don'ts:
1. Do not use metal smart phone covers
as it would halt the wireless charging
function. The wireless charging may
not function properly when there is a
heavy & thick accessory cover on the
smart phone.
197