Akaso BRAVE 7 LE User Manual page 15

EN
5. Distortion Calibration: Off/On
Default setting is Off.
This setting corrects the fisheye effect that can occur in wide-angle shots, resulting
indistortion-free images.
6. Driving Mode: Off/On
Default setting is Off.
If you turn on Driving Mode and connect camera with car cigarette lighter, the camera
will turn on automatically if you start your car and will turn off if you stop your car.
7. Upside Down: Off/On
Default setting is Off.
This setting determines the orientation of your video or photos to help you prevent
upside down footage.
Note: The user interface will be upside down when Upside Down is enabled.
8. Screen Saver: Off/1 Min/3 Min/5 Min
Default setting is 1 Min.
Screen saver helps to turn off the display after a period of inactivity to save battery life.
To turn on the display again, press any button or tap the screen on the camera.
9. Auto Power Off: Off/1 Min/3 Min/5 Min
Default setting is 3 Min.
Auto Power Off helps to power off camera after a period of inactivity to save battery
life.
10. Power Frequency: 50Hz/60Hz
Default setting is 50Hz.
11. White Balance: Auto/Daylight/Shade/Tungsten Light/White Fluorescent
Default setting is Auto.
White Balance lets you adjust the color temperature of videos and photos to optimize
for cool or warm lighting conditions.
14