Panasonic KV-S6040W Operating Instructions Manual page 12

Display Panel Instructions
Imprinter menu
Depending on the setting of the "Counter setting menu", the page number of the scanned document will
be printed. The imprinter unit (KV-SS010) is required. If a host computer is connected, there may be
settings required on the host computer as well.
Item
Contents
Setting the imprinter data
Allows for the printing data to be selected.
The imprinter will print on the front side of the document scanned.
Setting the imprinter position
Allows for the selection of the printing position using a imprinter.
"Others" menu
Item
Contents
Checking the Firmware
Version
Displays the firmware version of the mechanical control or imprinter.
If an optional imprinter is not installed, the imprinter version will not be
displayed.
Setting the "Buzzer"
Selects whether the buzzer is turned on or off. If selection is in the "ON"
position :
When pressing a key, one short beep will be heard.
When there is an error, five short beeps will be heard.
When scanning is completed, one long beep will be heard.
Setting the SCSI ID
Sets the SCSI ID number.
Setting the "Terminator"
Sets "Enable" or "Disable".
Checking the "Roller Cleaning
Warning"
The alarm tells you it is time to check the roller. If it is near 100%, clean
the roller. See "Cleaning the Unit" on page 30.
Clearing the "Roller Cleaning
Warning"
Clear the "Clean Roller Warning
00%"
display.
Checking the roller modules
replacement warning
The alarm tells you the roller module needs to be changed. If it is near
100%, replace the paper feed roller module, separation roller module and
retard roller module.
See "Replacing Consumable Roller Modules" on page 38.
Clearing the roller modules
replacement warning
Clear the "Replace Roll. Warning 00%" display.
Setting the "Product ID"
Selects the product ID. The product ID setting depends on the host
computer scanner application you are using.
Setting the "Double Feed"
detector sensitivity
Selects the sensitivity of the Double Feed Detector.
12