Gas Oven - Zanussi GC 18 B Instructions For The Use And Care

Operation
Safety cut off
The cooker is equipped with a safety cut
off device which totally interrupts the gas
supply of the worktop, oven and grill
burners. By lowering the worktop cover,
the gas supply is interrupted. To restore
gas supply, lift up the cover and depress
the black button placed on the back left of
the worktop.
Worktop burners
To light a worktop burner, turn the
relevant knob anticlockwise to maximum
(Fig. 1).
After opening the tap to maximum, push
button marked by a small electric spark.
As soon as the burner is lit, adjust the
flame as required.
To ensure maximum burner efficiency, it
is strongly recommended that you use
only pots and pans with a base fitting
the size of the burner used, so that
the flame will not spread beyond
the base of the vessel.
It is also advisable, as soon as a liquid
starts boiling, to turn down the flame so
that it will barely keep the liquid
simmering.
Important: Be very careful when frying
food in hot oil or fat as the overheated
splashes could easily flare up.
Gas oven
The oven features a small grill/roasting
pan, a baking tray and two shelves.
Furthermore this oven fits a device which
makes the ignition of the burner easier.
The instructions are the following:
1. Open the oven door.
2. Firmly depress the oven control knob
(Fig. 2) and turn it anticlockwise to the
maximum setting and at the same time
operate on the relevant pushbutton
marked by a small electric spark. Keep
the oven control knob depressed for
10-15 secs.
fig. 2
8