Technical Data; When The Oven Is First Installed - Zanussi EC 29 B Instructions For The Use And Care

Installation Technical Data
It is mandatory that all operations
required for the installation be carried
out by QUALIFIED PERSONNEL in
accordance with existing rules and
regulations.
The relevant instructions are to be found
in the special sheet for the installer.
This appliance meets the requirements
laid down in EEC Directive No. 82/499
dated 7/6/1982 relating to the
suppression of radio and TV
interferences.
When the oven is first installed
Once the oven has been installed it is
important to remove the protective
materials which were put on in the
factory.
Remove the plastic film from these
parts, then wipe with a cloth dipped in
methylated spirit.
Switch the oven control to MAX and
leave it to run, empty, for 30 minutes to
bum off any protective materials. This
will also remove any unpleasant new
smells.
Model Number: EC29B-EC29G
Dimensions (does not include protrusion
of knobs)
Height
Width
Depth
Oven Capacity
900/850 mm
597 mm
595 mm
1.9 cu.ft
Hob
Rear left dia. mm. 145 (N)
Front left dia. mm. 180 (R)
Rear right dia. mm. 180 (N)
Front right dia. mm. 145 (R)
Maximum power absorbed
1000 W
2000 W
1500 W
1500 W
6.0 kW
Oven Ratings
Oven element
Convection fan
Grill element
Oven lamp
Total Rating
Total Appliance
Rating
Power Supply
2.5 kW
35 W
2.0 kW
15 W
2.550 kW
8.550 kW
240 V (50 Hz)
5