Installation; Technical Data - Zanussi GC 18 B Instructions For The Use And Care

Installation
Technical Data
It is mandatory that all operations
required for the installation be carried
out by QUALIFIED PERSONNEL in
accordance with existing rules and
regulations.
The relevant instructions are to be found
in the special sheet for the installer.
Please ensure that when the appliance
is installed it is easily accessible for the
engineer in the event of a breakdown.
This appliance meets the requirements
laid down in EEC Directive No. 82/499
dated 7/6/1982 relating to the
suppression of radio and TV
interferences.
When the oven is first installed
Once the oven has been installed it is
important to remove the protective
materials which were put on in the
factory.
Remove the plastic film from these
parts, then wipe with a cloth dipped in
methylated spirit.
Switch the oven control to MAX and
leave it to run, empty, for 30 minutes to
bum off any protective materials. This
will also remove any unpleasant new
smells.
Model GC 18 B - GC 18 G
Dimensions: height 850/900 mm
depth 595 mm
width
597 mm
Oven volume 48 dm3
Automatic push button ignition:
oven, hob + grill
YES
Safety cut off with manual
reset: oven, hob + grill
YES
Oven light 15 W
Mechanical minute minder
60 mins
Supply voltage
240V -50Hz
Gas oven burner 3,0 kW
Grill rating 2,7 kW
5