Zanussi GC 18 B Instructions For The Use And Care page 17

To replace the door:
1. Clasp the two hinges on either side of
the door together simultaneously.
2. Hook the top hinge into the top slot
so that the hook is engaged with the
roller.
3. Drop the lower hinge into the lower
slot, so that the notch is engaged.
Drop the door down so it is in the
horizontal position.
NOTE: It is very important when
carrying out this operation that both
hinges should be located simultaneously.
4. Turn the retaining discs back a quarter
turn so that the two raised bars are
opposite the hinges.
The door can then be closed.
17