Advertisement
obtained,
Remove the test weight and recheck the
zero offset value.
Note that adjusting P1 may also
alter the zero offset value,
Repeat the process as
necessary to obtain the correct difference,
Now you may turn the scale off by pressing the "ON"
pushbutton and holding it in for a few seconds.
That
will force it to tum off.
You may also wait for it to
time out and turn off by itself.
4.80
FACTORY SERVICE HELP
If service information is to be obtained by calling the
factory, the serial number and model number of the
scale must be communicated at the beginning of the
call to allow our service staff to quickly access the
manufacturing
records,
calibration
data,
service
records, and other pertinent information concerning
that particular scale.
(These numbers can be found
on
the
data
label
attached
to the
rear
of the
enclosure.)
NOTE:
IN ALL
CASES,
CALL
THE
FACTORY
BEFORE RETURNING ANY PARTS OR SCALES
FOR
REPAIRS.
MOST
PROBLEMS
CAN
BE
DIAGNOSED AND SOLVED ON THE PHONE BY
MAKING A FEW TESTS.
IT IS ALWAYS NECESSARY TO CONTACT THE
FACTORY
FOR
A
RETURN
AUTHORIZATION
NUMBER,
SHIPPING
INSTRUCTIONS
AND
ADDRESS.
CALL
630-653-3377,
DO
NOT
SHIP
SCALE
TO
THE
NEW
YORK
FACILITY.
5002, 5102, 5602, 6002, 6102, 6202, 6502, 6702
31
Advertisement
