Transportation And Changing Of Installation Position; Before Calling Your After Sales Service - Indesit INC 871 Instructions For Use Manual

When replacing the bulb of the fridge;
1. Unplug the unit from the power supply,
2. Press the hooks on the sides of the light cover top
and remove the light cover
3. Change the present light bulb with a new one of not
more than 15 W.
4. Replace the light cover and after waiting 5 minutes
plug the unit.
Replacing LED Lighting
If your fridge has LED lighting contact the help desk as this should be changed by authorized
personnel only.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION

Transportation and Changing of Installation Position

• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secured with a wide string or a strong rope. The
instructions written on the corrugated box must be followed while transporting.
• Before transporting or changing the installation position, all the moving objects
(ie,shelves,crisper...) should be taken out or fixed with bands in order to prevent them from
getting damaged.
BEFORE CALLING YOUR AFTER SALES
SERVICE
If your refrigerator is not working properly, it may be a minor problem, therefore check the
following.
The appliance does not operate,
Check if:
• There is a power failure,
• The mains plug is not plugged in properly, or is loose
• The thermostat setting is on position "•",
• The socket is defective. To check this, plug in another appliance that you know is working into
the same socket.
The appliance performs poorly,
Check if:
• You have overloaded the appliance,
• The doors are not closed properly,
• There are not enough ventilation ducts on the kitchen unit as mentioned in the Installation
Manual.
If there is noise:
The cooling gas which circulates in the refrigerator circuit may make a slight noise (bubbling sound)
even when the compressor is not running. Do not worry, this is quite normal. If you hear a different
sound,
check if:
• The appliance is installed firmly as described in the Installation Manual.
• The objects on the appliance are vibrating.
14