Table of Contents
Advertisement
4.
To remove accessory: Repeat steps 1 and 2. Press accessory upward as far as possible
and turn to the left. Then pull accessory from the Beater Shaft.
Scan code for more information
BEATER TO BOWL CLEARANCE
Your Stand Mixer is adjusted at the factory so the Flat Beater
Bowl. If, for any reason, the Flat Beater
Bowl, you can correct clearance easily.
1.
Turn Speed Control Lever to off (0). Unplug Stand Mixer.
*Also available as an optional accessory.
*
hits the bottom of the Bowl or is too far away from the
just clears the bottom of the
*
11
Advertisement
Table of Contents
