Reverse Sewing - Pfaff 260 Service Manual

Reverse Sewing
To backtack the beginning or end of a seam, the machine is briefly switched
to reverse stitching by depressing spring-loaded finger-tip control H. The
machine can be switched to backward sewing, regardless of the stitch length
set. When the control is released, the machine resumes forward sewing auto-
matically. If a longer stretch of seam is to be sewn in reverse, turn the stitch
length dial counter-clockwise past 0, setting it on one of the two unnumbered
graduation marks (Fig. 24}.
First mark
Second mark
I.
Fig. 25
s
short reverse stitches,
long reverse stitches.
II.
Fig. 26
Fig . 2S Bobbin thread tension S
14
Ill.
Fig. 27
Fig. 29 Needle thread tension M