Table of Contents
Advertisement
Available languages
Available languages
S
ELECTING OPERATION MODES
1
Press
to start the operation.
2
Press
to select operation
mode. Each press changes mode in
the following order:
(I FEEL)
(COOL)
3
Press
or
Each press raises or lowers the tem-
perature by 1°C.
Press
to stop the operation.
• The same setting is selected the next time by
simply pressing
(DRY)
(FAN)
to set the temperature.
.
Note:
Operation indicator lamp
The operation indicator lamp shows the operation state
of the unit.
Indication
Operation state
JY09/13/15 JY18/24 The unit is oper-
ating to reach the
set temperature
The room
temperature is
approaching the
set temperature
Lit
I FEEL mode
The unit selects the operation mode according to
the room temperature when I FEEL is selected.
When the room temperature is higher than 25°C,
COOL is selected (set temperature: 24°C). When
the room temperature is lower than 25°C, DRY is
selected. However, when operation is stopped and
then started within 2 hours, the mode which has
been selected previously is operated.
Note:
During COOL operation, the set temperature may
not be changed when the room temperature is
more than 2°C higher than the set temperature. In
this case, please wait until the room temperature
drops to within 2°C of the set temperature.
COOL mode
Enjoy cool air at your desired temperature.
DRY mode
Dehumidify your room. The room may be cooled
slightly.
Temperature cannot be set during DRY mode.
FAN mode
Circulate the air in your room.
Room
temperature
About 2°C or
more away from
set temperature
About 1 to 2°C
from set
temperature
Not lit
En-8
Advertisement
Table of Contents
