Selecting Operation Modes - Mitsubishi Electric Mr. Slim MSY-KT09VF Operating Instructions Manual

● OPERATING INSTRUCTIONS ●
S
ELECTING OPERATION MODES
1
Press to start the operation.
2
Press to select operation
mode. Each press changes mode in
the following order:
(I FEEL) (COOL)
3
Press or
perature.
Each press raises or lowers the tem-
perature by 1°C.
Press to stop the operation.
• The same setting is selected the next time by
simply pressing
En-7
www.ttair.co.th | Tel : 02-385-0728 | E-mail : sales@ttair.co.th | LINE ID : @ttair
(DRY) (FAN)
to set the tem-
.
Note:
Operation indicator lamp
The operation indicator lamp shows the operation state
of the unit.
Indication Operation state
KT09/13/
KT24
The unit is oper-
15/18
ating to reach the
set temperature
The room tem-
perature is ap-
proaching the
set temperature
Lit
I FEEL mode
The unit selects the operation mode according to
the room temperature when I FEEL is selected.
When the room temperature is higher than 25°C,
COOL is selected (set temperature: 24°C). When
the room temperature is lower than 25°C, DRY is
selected. However, when operation is stopped and
then started within 2 hours, the mode which has
been selected previously is operated.
Note:
During COOL operation, the set temperature may
not be changed when the room temperature is
more than 2°C higher than the set temperature. In
this case, please wait until the room temperature
drops to within 2°C of the set temperature.
COOL mode
Enjoy cool air at your desired temperature.
DRY mode
Dehumidify your room. The room may be cooled
slightly.
Temperature cannot be set during DRY mode.
FAN mode
Circulate the air in your room.
Room
temperature
About 2°C or
more away from
set temperature
About 1 to 2°C
from set tem-
perature
Not lit