Advertisement
SECTION 2. CONTROLS
& OPERATION
2.1
FRONT PANEL
Indicator ( 1 on Fig. 2 )
The neon bulb lights up when power is on.
2.2
REAR PANEL
POWER SUPPLY connector ( 2 on Fig. 2)
This connector provides the power supply connection and speaker connection
with the TS-51 IS.
FAN socket { 3 on Fig. 2 )
This socket provides a power supply for the fan of the TS-51 IS.
GND lug ( 4 on Fig. 2 )
The ground lug is used for an adequate ground.
V
ADJ control ( 5 on Fig. 2 )
The voltage of 150
V
line is controlled slightly by this control (
VR
1
)
AC line cord
( 6 on Fig. 2 )
Fuse ( 10 A ) ( 7 on Fig. 2 )
2.3 OPERATION
The PS-51 IS power supply is not provided with a power on-off switch
since it can be operated from the power switch of the TS-51 IS.
4
Advertisement
