Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eureka MIGNON LIBRA MS
Summary of Contents for Eureka MIGNON LIBRA MS
- Page 1 MIGNON LIBRA USER HANDBOOK Translation of the Original Instructions...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS The producer has reasonably considered every precaution possible, so to assure user’s safety. Anyway, in installing and using the grinder, various conditions may create uncontrollable and unpredictable events; so, it’s always necessary to evaluate any risks and consider what follows: a.) Read all instructions. - Page 3 • Do not use any water jets, unsuitable detergents or steam-cleaners to clean. • During its use, install the grinder on a flat and stable surface being able to sustain the weight of the grinder. • The grinder is intended to be used only to grind roasted coffee beans. A different use is considered unsuitable and dangerous.
-
Page 4: Importance Of The Manual
IMPORTANCE OF THE MANUAL This manual is adressed to the user of the grinder and it is considered part of this product. It shares information on its correct use and maintanance, including information on user’s safety. This manual must be held during all the grinder’s lifespan and must be transmitted to any user or future owner. - Page 5 O : OFF...
-
Page 8: General Information
GENERAL INFORMATION MANUFACTURER: CONTI VALERIO - Via Luigi Longo, 39/41 - 50019 Sesto Fiorentino (FI) – ITALY MODEL: MS TECHNICAL DATA DESCRIPTION 220/240 Volts (V) 50-60 Frequency (Hz) Power consumption (W) 1350 1630 Production rate (g/s) 1,4 - 1,8 (espresso) / 1,9 - 2,5 (brew) Empty weight (kg) Hopper capacity (g) (510) -
Page 9: Description Of The Appliance
DESCRIPTION OF THE APPLIANCE 1. Container lid 9. Power switch 2. Coffee bean container 10. Dispensing grams/dose count 3. Grinding adjustment knob display 4. Touch screen display 11. Continuous dispensing active 5. Dispensing nozzle 12. Decrease button 6. Filter-holder adjustable fork 13. - Page 10 5.2.2 DOSE DISPENSING AND ADJUSTMENT • After positioning the filter-holder on the fork, choose the dose to be dispensed by pressing the single dose (14) or double dose (15) button (the selected button lights up). • During dispensing, the display will show the value of the weight measured up to the set value.
- Page 11 ATTENTION If the grinding is not restarted or the filter-holder is removed within 30 seconds, the system will reset. With the dose paused it is only possible to change the selected dose, if the weight of the ground coffee has not exceeded the value of the dose to be selected.
-
Page 12: Grinding Adjustment
5.2.6 DOSE COUNTS Upon powering on the machine, hold down the buttons (12) and (14) for a few seconds. The display shows the total grams dispensed in pairs of digits in succession. For example, if the total number of grams dispensed in 1634, the digits appear on the display for two seconds. -
Page 13: Cleaning And Maintenance
ATTENTION If the weighing system, during the grinding phase, does not detect a change in grams on the filter-holder, it will stop to prevent the motor from overheating. CLEANING AND MAINTENANCE ATTENTION Do not leave the filter-holder inserted on the filter-holder fork. ATTENTION Disconnect the appliance from the power supply before carrying out any cleaning and maintenance operations. -
Page 14: Maintenance
grinders. ATTENTION All cleaning and sanitising operations must be carried out with products approved for use with food. MAINTENANCE To ensure correct operation of the appliance, avoid grinding more than 160 g of coffee per activation. Check, and if necessary replace, the grinders every 300 kg of coffee. To carry out maintenance on the grinders, disconnect the appliance from the power supply and remove the bean container. - Page 15 CONTI VALERIO S.R.L Via Luigi Longo 39/41 - 50019 Sesto Fiorentino (FI) - ITALY...
Need help?
Do you have a question about the MIGNON LIBRA MS and is the answer not in the manual?
Questions and answers