Activating Tone Function; Selecting A Tone Frequency - Kenwood TH-G71E Instruction Manual

■

Activating Tone Function

1 Select the desired band.
1
2 Press [F], [LOW] to switch the Tone function ON
(or OFF).
2
• "T" appears when the Tone function is ON.
3
2
4
5 1
Note: You cannot use the Tone and CTCSS functions
6
simultaneously. Switching the Tone function ON after activating the
CTCSS deactivates the CTCSS.
7 When you access repeaters that require 1750 Hz
TH-G71E only:
tones, you need not activate the Tone function. No matter which
selection you make here, pressing
8
switch or simply pressing
1750 Hz tones.
9
■

Selecting a Tone Frequency

1 Select the desired band.
10
2 Press [F], [LOW] to activate the Tone function.
11
• "T" appears.
3 Press [F], [9].
12
• The current tone frequency appears and blinks.
13
1
14
2
15
14
while pressing the
[LOW]
[LOW] causes the transceiver to transmit
4 Turn the Tuning control to select a tone
frequency.
5 Press any key other than [LAMP] and [MONI] to
complete the setting.
Freq. (Hz)
67.0
71.9
74.4
77.0
79.7
82.5
PTT
85.4
88.5
91.5
94.8
TH-G71E only:
switch, then press
quits transmitting 1750 Hz tones.
[LOW]
Freq. (Hz) Freq. (Hz)
97.4 136.5
100.0 141.3
103.5 146.2
107.2 151.4
110.9 156.7
114.8 162.2
118.8 167.9
123.0 173.8
127.3 179.9
131.8 186.2
To transmit 1750 Hz tones, press and hold the
[LOW], or simply press and hold
Freq. (Hz)
192.8
203.5
210.7
218.1
225.7
233.6
241.8
250.3
PTT
[LOW]. Releasing