Computer Stand - Lenovo ThinkCentre M90a Gen 5 User Manual

Computer stand

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Turn off the computer and remove all connected devices and cables.
2. Disconnect the computer from ac power and all connected cables.
3. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay
it down so that the screen is against the surface and the computer cover is facing up.
Replacement procedure
Note: Some computer models might not be shipped with a computer stand. In this case, remove the mylar
over the computer stand hole first if you want to install a new computer stand.
Depending on your computer stand, refer to one of the following to replace the computer stand.
• Full-function monitor stand
24
M90a Gen 5 User Guide