1. GENERAL GUIDE, RESET OPERATION & BATTERY REPLACEMENT Mode key Memory keys Display 10-key pad Operator keys Display Change key ON/OFF key Mode keys Cursor keys Light key Scroll/Search keys Function key Alpha keyboard ESC key Display When lighting is dim, you can turn on an EL (electro-luminescent) backlight for easier viewing. To turn on the EL backlight Press the LIGHT key to light up the display for about 15 seconds.
Page 4
All-Reset Use the following procedure to reset the unit to its initial settings. Important! • Do not use a very sharp pencil or other object to press the RESET button. • Be sure to reset the unit before using it for the first time. •...
Page 5
2. Press FUNC, select “Time set”, and then use the procedure on page 18 of Owner’s Manual to set the Home Time. • If you turn power off without setting the Home Time, the “SET TIME!” message appears the next time you turn power on.
Page 6
To replace the main batteries Important! • Do not remove the main batteries from the Digital Diary while the back-up battery is removed. • Be sure to replace both batteries with two new ones. Do not mix an old battery with a new one. •...
Page 7
3. Insert a thin, pointed object into (A) and remove the old battery. 4. Load a new battery into the compartment, making sure that its positive side is facing up (so you can see it). 5. Replace the battery compartment cover and secure it with its screw. •...
Page 8
Key Input Sound When the key input sound is turned on, your Digital Diary emits a beep each time you press one of its keys. To turn key input sound on and off 1. Press SHIFT FUNC and then select “Key tone.” Currently selected setting 2.
Page 10
Memory Capacity Memory capacity differs according to model. Model Memory SF-5580E: 128 Kbyte SF-5780E: 256 Kbyte SF-5980E: 512 Kbyte The following shows the number of items that can be stored in each model. Telephone Directory 8-character name, 10-character Phone 1 number...
You can transfer data between two CASIO SF-5580E,SF-5780E, or SF-5980E units, or between your Digital Diary and a personal computer only. You cannot exchange data with any other CASIO Digital Diary model. Data communications can be performed while in the Telephone Directory, Memo, Schedule Keeper, Calender, To Do, Reminder, or Expense Manager Mode.
Page 12
To set up the Digital Diary to receive data 1. While any screen is displayed, press FUNC (or SHIFT FUNC) and then select “Receive data”. • You can perform the above operation in the Telephone Directory, Memo, Schedule Keeper, Calen- dar, To Do, Reminder, or Expense Manager Mode.
Page 13
To send one data item 1. Display the data display of the item you want to send. 2. Press FUNC and then select “Send record”. • A message appears asking if you are ready to send. 3. Press Y to start the send operation, or N to abort. •...
Page 14
2. Press FUNC and then select “Send all files”. 3. Use to move the pointer to the file whose data you want to send, and then use to change the setting. • Files set to “Yes” will be sent, while those set to “No” will not. 4.
“ARE YOU USING A NEW UNIT FOR THE FIRST TIME (Y/N)?” in order to reset the unit after a data error occurs. If you still have trouble after trying the RESET operation, you may have a hardware problem. If so, consult with your nearest CASIO dealer. Message Table Message...
1. Executing this check, the data stored in this Digital Diary disappear. So if you won’t disap- pear this important data, you should store its data in another Digital Diary (SF-5580E/5780E/ 5980E) referring to the item 3. Data communications in this manual.
Page 17
7 Wait about 45 ~ 50 seconds. In the case of SF-5580E, LCD display ROM TEST ROM OK RAM TEST 1 2 8 K OK In the case of SF-5780E, ROM TEST ROM OK LCD display RAM TEST 1 2 8 K OK...
Page 18
B Connect two units using the SB-62 cable as shown by the item 3. DATA COMMUNICATIONS (page 9) in this manual. C Press 2 button on any unit (A). This unit’s ROM TEST ROM OK LCD display RAM TEST XXX K OK KEY TEST 2 ECHO D Then press 1 button on another unit (B).
7. LSI PIN FUNCTION CPU (LC868016A): U1 Pin No. Name I / O Function Power supply for this CPU 2~65 S1~48,C1~16 O Common signals to LCD O Bias power supply to LCD VLCD O Power supply to LCD — Ground for this CPU O Clock for LCD driver LSI(U2, U3:LC868900) O Signal to LCD driver LSI(U2, U3:LC868900)(AC voltage is supplied to LCD by this signal.)
8. DISASSEMBLY 1 Remove two screws then remove the battery cover. 2 Remove three screws. 3 Open the unit and remove two screws behind the display plate. Display plate — 24 —...
Page 27
4 Remove Lower cabinet (keyboard). Lower cabinet (keyboard) 5 Remove Rubber key and knob. Rubber key 6 Desolder the wire connected to the buzzer on the Lower Knob cabinet (keyboard) from key- board PCB ass’y. 7 Remove Lower cabinet (display). Lower cabinet (display) —...
Page 28
8 Remove screws on PCB shown above then remove PCB ass’y. Main PCB (11 screws) Keyboard PCB (13 screws) 9 Separate upper cabinets. REMARK: Heat seal and wires must be placed inside of the hinge in order for the Lower cabinet (keyboard) to fit into place.
2259 2712 Transistor TRR-01-M6 Common 2390 3005 Diode DIO-01-LS4148 Common 16 C D2~D17 6420 1950 Coil C01-02-4615 Common The following electronic parts will be not supplied from CASIO. Chip resister(1.5KW) RES-01-1.5K Common Chip resister(1MW) RES-01-1M Common R15~16 Chip resister(100KW) RES-01-100K Common...