Maneuvering Around Schedule Keeper Dates - Casio SF-5590SY User Manual

The Schedule Keeper lets you input the time and a description of your appointment
and set Schedule Alarms.
* Pressing REMINDER in the Schedule Keeper Mode enters the Reminder Mode
for the date that is currently selected in the Schedule Keeper Mode. Pressing
CALENDAR displays the month with the date cursor located at the Schedule
Keeper date.
To enter the Schedule Keeper Mode
Press SCHEDULE to display the initial Schedule Keeper Mode screen.
Mode
Number of records
stored in mode
Memory usage
Initial prompt
° Pressing SCHEDULE in the Calendar Mode displays the Schedule Keeper for
the date where the date cursor is located inside the calendar or weekly schedule
screen.
@ Maneuvering Around Schedule Keeper Dates
The following describes the basic operations for selecting a date to input Schedule
Keeper data.
To jump to a specific date
1. in the Schedule Keeper Mode, press FUNC and then select "Date search".
Ineut month, day.sear
iv 171996
» Note that this method to jump to a specific date works only when there is
Schedule Keeper data already stored in memory. To select a date when there is
no Schedule Keeper data stored yet, select the date you want in the Calendar
Mode with the date cursor and then press SCHEDULE.
« Note that this procedure cannot be started from the daily schedule screen.
2. Input the month, day and year, and then press OK.
To scroil from one date to another
While the Schedule Keeper screen for a date is already displayed, press & or # to
scroll back to the previous date. Pressing W or ¥ scrolls to the following date.
« Ifthe date that is displayed contains more than one Schedule Keeper data entry,
the above keys scroll through the data one-by-one. The above key operations
change the date only when the first (top) or last (bottom) data item is on the
display.
To inpui Schedule Keeper data
1. Display the Schedule Keeper screen for the date where you want to input data.
2. Input the description of the appointment.
Even if there is already schedule data on the display, simply start inputting the
description and the previous data will disappear.
3. Press @& and the schedule type specification starts to flash.
Do not press for F. Deing so will start a search using the text you input {page
48}.
4. Press <4 or » to display the schedule type selection menu.
If you do not want to change the default setting of Schedule Type 1, press A
again without pressing or ».
5. Input a value from 1 to 8 to specify a schedule type and return to the Schedule
Keeper display.
Fress #& and the starting time specification starts to flash.
. Input the start time and end time of the appointment,
Use the 12-hour/24-hour format af the Home Time (page 19).
If you want to input only 4 start time, don't input anything for the end time (leave
it the same as the start tire}.
~l
s .
-495-