General Information Regarding Safety - Custom Audio Electronics DP24-42BA User Manual

GENERAL INFORMATION REGARDING SAFETY

· Read and keep the following instructions.
· Observe all warnings and follow all instructions attached to the printer.
· Before cleaning the printer, disconnect the feed cable.
· Clean the printer with a damp cloth. Do not use liquid or spray products.
· Do not operate the printer near to water.
· Do not place the printer on unsteady surfaces. It could fall and get seriously
damaged.
· Use the type of electricity supply marked on the printer label. In the event of
uncertainty, contact the seller.
· Position the printer in such a way as to ensure that the cables connected to it will
not be damaged.
· Ensure that the maximum absorbed current of the printer does not exceed the
maximum acceptable current for the type of feed cable used.
· Do not put objects of any kind inside the printer as they could cause a short circuit
or damage parts which could affect its performance.
· Do not spill liquids on the printer.
· Do not carry out technical operations on the printer with the exception of the
scheduled maintenance operations specifically indicated in the user's manual.
· Disconnect the printer from the electricity supply and have it repaired by a
specialized technician should any of the following conditions occur:
A. The feed connector has been damaged;
B. LIQUID has penetrated to the inside of the printer;
C. The printer has been exposed to rain or water;
D. The printer is not operating normally despite the instructions in the user's
manual having been followed;
E. The printer has been dropped and its case damaged;
F. The performance of the printer is poor;
G. The printer does not work.
3
DP 24/42 BA