AJAX ManualCallPoint Jeweller User Manual page 6

ManualCallPoint can transmit the following events:
1. Fire alarm/recovery.
2. Tamper alarm/recovery.
3. Loss/restoration of connection with the hub.
4. Permanent deactivation/activation of the button.
When an alarm is received, the operator at the security company's CMS knows
what happened and precisely where to dispatch a rapid response team. The
addressability of Ajax devices allows sending events to PRO Desktop or the
CMS, including the device type, its name, security group, and virtual room. Note
that the list of transmitted parameters may vary depending on the CMS type and
the selected communication protocol for it.
The ID and the loop (zone) number of the device can be found in its
app .
Adding to the system
ManualCallPoint is incompatible with
ocBridge Plus and uartBridge integration modules.
To connect ManualCallPoint to the hub, the device must be located at the same
secured facility as the system (within the range of the hub radio network). When
using ReX or ReX 2
then connect it to ReX or ReX 2 in the range extender settings.
The hub and the device operating at different radio frequencies are incompatible. The
radio-frequency range of the device may vary by region. We recommend purchasing and
using Ajax devices in the same region. You can verify the range of operating radio
frequencies with the
Before adding a device
radio signal range extender, rst add the device to the hub,
technical support service
Hub , third-party security central panels, or
.
states in the Ajax