AJAX ManualCallPoint Jeweller User Manual page 5

In the Scenario Trigger mode, ManualCallPoint allows you to control one or
more automation devices
To bind an automation device action to the ManualCallPoint press, follow these
steps:
1. Open the Ajax app
2. Select ManualCallPoint in the list of devices and go to the Settings by
clicking the gear icon
3. Select the mode Scenario Trigger in the Operating Mode section.
4. Go to the Scenarios menu. Click Create Scenario if you are creating a
scenario for the rst time, or Add Scenario, if scenarios have already been
created in the system.
5. Select the automation device to execute the action.
6. Enter the Scenario Name and specify the Device Action to be executed by
pressing ManualCallPoint:
Switch on;
Switch off.
The Device Action setting is unavailable when con guring a scenario for
automation devices
devices will close/open the contacts for a set time. You can adjust the operating
mode and pulse duration in the automation device settings.
7. If you've selected multiple devices, specify which of them will trigger the
scenario: any from the list or all selected devices during the set time.
8. Click Save.The new scenario will now appear in the device scenarios list.
Sending events to the monitoring station
The Ajax system can transmit alarms to both
the CMS in the formats of SurGard (Contact ID), SIA (DC-09), ADEMCO 685, and
other protocols .
by pressing the button.
and go to the Devices
.
operating in pulse mode. When the scenario runs, these
tab.
PRO Desktop monitoring app and