Advertisement
"
Operation procedure___
@ Insert two AA-size (R6 / SUM-3) batteries as indicated by the polar-
ity Marking,
hh eee
hee
eee
eT
TTT
ici tte tT iter rite Te ree Te Tia Teer eee errr e re rere rere
rrr errr
ae IN 8 ICE eS SEBO
CIMINO SNE
= 32 EN GNC SE OA A
mm
te
ee
a
Plug the power cord of the system into an AC wall outlet, and
press the POWER key on the remote control unit to turn the
power on. When the power is turned on, press the key of the
source component to be operated.
Remote sensor
@ Components connected via the system control cords, such as the
CD player, can also be remote-controiled. In this case, please read
the instruction manual supplied with your components.
e When two operation keys on the remote control unit are pressed
successively, press each key securely reserving an interval of more
:
than 1 second for each press.
Model: RC-R0704
Infrared ray system
+
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2 When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
3 Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote contro! light
sensor. In such a case, change the system installation position to prevent the malfunction.
Advertisement
