Advertisement
eee
KR-V7070 [En
Make
connection as shown below.
f When connecting the related system components, refer also
pla une U an of misrocemputer
2
-
-
to the instruction manuals of the related components.
@, If operation is not possible or erroneous display appears
Do not plug in the power
lead until all connections
are
even though all connections have been made properly,
completed.
reset the microcomputer referring to "In case of diffi-
culty".
- [P.26
_f
}2
09
oooe
Se
Ventilation fan
Shape AC outlets
om
Other countries
oir
Video cord
To
wall
AC outlet
Ventilation fan
The fan rotates during high-power reproduc-
tion. To allow the ventilation, install the com-
ponent
by reserving
a certain
distance
between its rear and the wall,
Automatic operation
If you connect other KENWOOD components (i.e. a cassette deck or CD player) to this unit's SYSTEM CONTROL, this unit's input selector will
automatically switch to that component when you start playback from it. This also works when you use the remote control.
(Autematic operation is not possible with TAPE DECK 2 ar VIDEO machines.}
1. Connect ali cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging / unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
3. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.
4. Insert the system control plugs completely into the jacks.
5. If the system control cords or audio cords are not connected properly, the remote control or automatic operation between system
components will not work properly.
Advertisement
