Advertisement
Broadcast band indicators
SPEAKERS
indicators
VIDEO 1/2 indicators
DSP indicator
Frequency display,
Input display,
Preset channel display,
Surround mode display
DSP LOGIC indicator
SURROUND indicator
3 STEREO
indicator
TAPE 2 indicator
KR-V7070 (En)
Tuning made indicator
Reception mode
indicator
TUNED indicator
EMORY
indicator
LINE STRAIGHT indicatar
N.B. indicator
@POWER key
@ STANDBY indicator
© Numeric keys
@ AUTO key
@ DIRECT key
Press for direct station tuning based on
numerical input.
@ MEMORY key
Press to preset a station in the memory.
@INPUT SELECTOR knob
Turn to select the input sources.
OTAPE 2(MONITOR] key
@VOLUME
CONTROL knob
@ DOLBY PRO LOGIC key
@ PHONES jack
Used for headphone listening.
@ DOLBY 3 STEREO key
@ SPEAKERS A/B
keys
Press to select the A and/or B speaker
systems.
|.
@WN. B. CIRCUIT key
Use for correct reproduction of natural
bass sound,
@®DSP LOGIC key
@CENTER
MODE key
Press to select the center mode of the
DOLBY PRO LOGIC surround play.
@DSP key
@BYPASS key
Press to cancel the surround modes.
@LINE STRAIGHT key
- Press to reproduce the source
with a
higher sound quality.
@ BAND key
Press to switch the broadcast band.
@ BALANCE keys
Turn to adjust the volume balance be-
tween left and right.
@ LEVEL MODE key
Selects the item whose presets are to be
changed (in SURROUND MODE).
@TUNING keys
@ MULTI LEVEL CONTROL knob
Adjusts up or down the presets of the
item selected with the LEVEL
MODE key
(in SURROUND MODE},
@Tone control knobs
STANDBY meade of POWER switch
When the power cord of this system is plugged into an AC outlet, the STANDBY indicator lights up regardless of the ON/OFF setting of the POWER
switch. This indicates that a smal! amount of current is being supplied to the unit to back up the memory contents. This mode is referred to as the
Standby mode. While the STANDBY indicator is lit, the power of the system can be switched ON/OFF from the remote control unit.
Advertisement
