Advertisement
KA-V7070 (En)
4
The surround modes allow to enjoy the feeling of presence in music. Select the mode according to the source or components
DOLBY 3 STEREO mode
-
If the left and right speakers are installed apart from each
other, the center acoustic image (words, etc.) may vary
depending on the listener's position. The DOLBY 3 STEREO
mode provides an improved positioning of the center acous-
tic image regardless of the listening position.
To use this mode, connect the center speaker.
DOLBY PRO LOGIC surround mode
~ (P.22
In case center speaker
is not used
Video and LD software programs carrying the [1] [Bou
sunncuns]
mark contain recording of the same Dolby Surround data as
those used in movie theaters.
The DOLBY
PRO LOGIC surround mode uses the Dolby
Surround data and brings into home a similar sound field
with full of presence to movie theater.
To use this mode, connect the rear (and center) speakers.
©)
nile
Mcca
NEESE
DSP presence mode
» Fa
This mode provides a live atmosphere to music
Soundscapes
sources. By adding the reverberation component of
@ ARENA
one of the three sound fields of this mode, it allows
@ a
a
to enjoy three kinds of sound fields with full of
a
feeling of presence. The sound field can be selected
according your liking.
To use this mode, connect the rear speakers.
DSP LOGIC
This mode provides the atmosphere of a movie
theater by adding the reverberation component of
movie theater to the DOLBY PRO LOGIC. To use this
mode, connect both the rear and center speakers.
The DSP stands for Digital Signal Processor. in the DSP presence and DSP LOGIC modes, the reverberation components (elements of
sound echoed tn various spaces) which determine the feeling of presence are created by digital processing by the DSP without spoiling
the sound quality of the original musi¢ source.
Advertisement
