Steps
1. Place the palmrest antenna module on the system and replace the two (M2x2.5) screws that secure it to the system.
2. Reroute the antenna cables through the routing channel and connect them to the WLAN module on the system board.
3. Replace the (M2x2) screw that secures the WLAN bracket to the system board.
Next steps
1. Install the
base
cover.
2. Install the
microSD
card.
3. Follow the procedure in
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
base
cover.
4. Remove the
WWAN
card.
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
after working inside your
before working inside your
card.
computer.
computer.
Removing and installing components
35