Advertisement
Assembling the Cover
Align the cover to the frame plate as shown in
6
and secure the cover with 3 button-head screws.
1. Frame plate
2. Cover
Adjusting the Track Tension
1.
Using a 1/2 inch drive ratchet, turn the tensioning
screw until the track gap is 13 mm (1/2 inch) as
shown in
Figure
Note:
Turning the screw counter-clockwise
tightens the track; turning the screw clockwise
loosens the track.
Figure 6
3. Button-head screws
7.
Figure
1. Road wheel
2.
Align the closest notch in the tension screw to
the locking-bolt hole and secure the screw with
the locking bolt and nut
g270674
1. Locking bolt
2. Tensioning screw
3
Figure 7
(Figure
8).
Figure 8
3. Spacer
4. Nut
g257979
g257903
Advertisement
