Table of Contents
Advertisement
INSTRUCTIONS FOR USE
WARNING! Do not operate the garment steamer without water in the water
tank.
IMPORTANT! The machine should be switched off before fitting or removing
accessories.
WARNING! Accessories become hot during use. Allow accessories to cool
down before handling them.
Fill water tank
1.
Remove the water tank from the garment
steamer as shown.
2.
Unscrew the water tank cap, located on
its underside, and fill the tank with cold tap
water. Screw the water tank cap back into
place and re-fit the water tank into the
garment steamer.
WARNING! Do not add chemicals, detergents,
disinfectant, eucalyptus oil or perfumes to the
water tank.
Connect to power supply
1.
Plug the garment steamer into the power
supply and switch the On/Off switch to the
on position. After 45 seconds the garment
steamer will be ready to use.
9
Advertisement
Table of Contents
