Table of Contents
Advertisement
8
4.
Screw the steam hose into the garment steamer
in a clockwise direction.
5.
Secure the sleeve protector strap onto the pole.
6.
Screw the steam head onto the steam hose in a
clockwise direction tightly.
WARNING! Allow the steam head to cool down
completely before attaching the fabric brush.
ATTENTION! Always steam with the hose in an
upright position, allowing any condensation to flow
back into the garment steamer. If steaming in a low
position close to the floor, ensure the hose is lying
straight.
7.
The fabric brush is ideal for steaming delicate
garments. To attach the fabric brush, clip the
brush onto the steam plate as shown.
Advertisement
Table of Contents
