Table of Contents
Advertisement
IMPORTANT! Tap water contains minerals that can build up inside your
garment steamer. Regular use of a descaling solution will remove this buildup
and maximise the efficiency of your garment steamer. We recommend the
use of a descaling solution every three months to enhance the performance
of your garment steamer.
CAUTION! Exposure to hot steam can cause scalding. Please allow the
garment steamer to cool down completely before removing the drainage
plug.
12
3.
Turn the On/Off switch to the on position. Run
the garment steamer until the water tank is
empty. Always perform this process in a well-
ventilated area.
NOTE: Do not leave the garment steamer
unattended during this process.
4.
Unplug the garment steamer from the power
supply and allow it to rest for 60 minutes, then
remove the drainage plug located at the
bottom of the garment steamer. Remove any
remaining mixture from the garment steamer.
5.
Once the water tank is empty, re-fit the
drainage plug and refill the water tank with
water. Run the garment steamer until the water
tank is empty once again to flush out any
remaining mineral buildup.
Advertisement
Table of Contents
