Table of Contents
Advertisement
Always disconnect the appliance from the power outlet and allow it to cool down
completely before cleaning.
1.
Never immerse the unit or power cord in water - or any other liquid.
2.
Clean all detachable parts after each use in hot, sudsy water.
3.
Wipe the exterior and warming plate with a clean, damp cloth - NEVER use an
abrasive or poisonous cleaner.
4.
Water droplets may build up in the area above the funnel and drip onto the base
during brewing. To control the dripping, wipe the area with a clean, dry cloth after
each use.
5.
Re-insert all detachable parts and keep for next use.
REMOVING MINERAL DEPOSITS:
To keep your coffee maker operating efficiently, you should clean away the mineral
deposits left by the water. This will vary depending on water quality and how often you
use this appliance.
We recommend de-scaling your coffee maker using the following steps below:
1.
Add 30 ml (2 tablespoons) of white vinegar in the carafe, then fill to maximum level
on water gauge with cold water.
2.
Insert carafe onto the warming plate.
3.
Ensure the funnel is assembled in place.
4.
Switch on the coffee maker and allow it to brew the de-scaling solution.
5.
After brewing has completed, switch off the appliance.
6.
Leave the solution for 15 minutes and repeat steps 3-5.
7.
Finally rinse the solution thoroughly with clean water at least 3 times.
CLEANING & MAINTENANCE
hamiltonbeach.co.uk
6
Advertisement
Table of Contents
