Advertisement
Check the following points if you are having trouble with your DECK.
Play fails to start even when PLAY is
pressed...
Play starts but then stops immediately...
Picture is distorted
during rapid
advance
or rapid reverse...
No Forward/Reverse
Scene Search
play...
Play does not start even when title is
selected...
Audio soundtrack
and/or subtitle
•
language is not the one selected at
the initial settings...
No subtitles...
•
Alternative
audio soundtrack
•
(or subtitle)
language cannot be
selected...
•
Angle cannot be changed...
•
Programs
cannot be viewed on TV...
Video cassette
cannot be inserted...
•
Video cassette
ejects when
•
a recording
is started or the power is
turned off for timer recording...
This DECK cannot play discs other than DVDs,
Video CDs and CDs.
The disc may be dirty and require cleaning.
Be sure disc is installed with label side up.
The picture will be somewhat
distorted at times:
this is normal.
Some discs may have sections which prohibit
Forward/Reverse
Scene Search.
(p. 23)
Confirm the "DVD LOCK" setting.
(p. 44)
If the audio soundtrack
and/or subtitle language
selected at DVD initial settings does not exist
on the disc, it will not be accessible.
Subtitles appear only when available
on disc.
"OFF" is selected at the changing
subtitle
language.
Select "ON" at the "Subtitle Languages"
section (p. 36) to display the subtitles.
Alternative
language
cannot be selected with discs
which do not contain more than one language.
For some discs, alternative
language cannot be
selected with the AUDIO or SUB TITLE button.
Try selecting
it from the DVD MENU if available.
This function
is dependent
on software
availability.
Even if disc has multiple angles, they may be
recorded
for specific
scenes only (ANGLE
indicator on DECK lights up). (p. 37)
Make sure TV is set to output of DECK.
Check connections
between
DECK,
external antenna,
and TV.
Set VCR/TV selector to "TV." (p. 21)
Make sure proper signal source is selected.
Insert the cassette with window side up; record
tab facing you.
Make sure cassette
record tab is intact. (p. 6)
In Stop mode, the motor (CYLINDER)
continues
to rotate...
The disc cannot be removed..
• To enable Quick play mechanism,
the cylinder will
rotate for about 3 minutes. This reduces
response
time from Stop to Play mode.
• First, unplug DECK. Then, prepare a rigid wire
(e.g. an extended paper clip) and, applying
moderate force, insert it straight into the hole at the
base of the tray. The tray will eject a little. Now, pull
the tray all the way out and remove the disc. (p. 9)
If you cannot resolve the problem, please call the Customer
Call Center for product
assistance
at 1-800-211-PANA
(7262).
To locate an authorized servicenter, please call toll free 1-800-211-PANA
(7262).
or send e-mail to : consumerproducts@
panasonic.com
51
Advertisement
