Advertisement
Review, Replace
or Clear Program
Contents:
(Recording
is not in progress)
Press PROG
to display Program List.
_
Press Av
to select number and
press SET
to display.
3
To Replace program...
E°'
oAoK:.J
or
To Clear program...
Repeat Step 2 (p. 24)
to set new programs.
Press ADD/DLT.
To cancel a Timer
_-- Recording
in progress...
Hold down
STOP
on VCR mode for
a few seconds
to cancel the Timer
Recording.
(The "TIMER"
Indicator
goes out
on Multi
Function
Display.)
• Any future daily or weekly recording
will be performed as programmed.
Press PROG
to end the programming.
• If you are using a Cable Box, the VCR's channel
for Timer Recording
must be set to
the Cable Box input channel
and Cable Box must be manually
set to the desired
channel.
Cable Box power must be left on.
• 2 minutes before Timer Recording
is performed,
"PLEASE
PREPARE
FOR TIMER
REC" appears and Timer Indicator
flashes.
Be sure a cassette with record tab is loaded and DECK is in Stop mode.
• If a power interruption occurs while programming
the timer, the timer program(s)
may be
canceled.
If "TIMER
PROGRAMS
WERE LOST DUE TO POWER
INTERRUPTION"
appears on-screen, please re-enter the timer programs.
• If the start time for Timer Recording comes up during recording and playing back,
Timer Recording
will not be performed.
Important notes when using DSS Receiver
• When recording
programs via DSS Receiver, DSS Receiver must be left on.
• When recording programs
via an antenna or cable, DSS Receiver
must be turned off.
25
Advertisement
