Advertisement
Connection
VCR! Camcorder
(Hi-Fi)
D VD/VCR DECK
TV
Front of DECK
VIDEOIN2L-AUDIO IN2-R
O
O
O
(Audio/Video In Terminals
on the front of DECK are
available)
(_
Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK.
To monitor the dubbing, also connect TV as shown.
(_)
Connect "L" and "R" AUDIO OUT terminals on Playing VCR to "L" and "R"
AUDIO IN terminals on DECK.
In place of Playing VCR, you can use other equipment,
such as a Camcorder.
Simply connect the unit's Audio/Video
outputs to DECK.
1
2
Insert a pre-recorded
tape.
Insert a blank tape with record tab.
Press INPUT to set DECK Input mode to
LINE for Video Input.
(See "Selecting the Input Mode" below.)
Press PLAY, then PAUSE/STILL
Press REC, then PAUSE/STILL
immediately to enter PLAY/PAUSE
immediately to enter REC/PAUSE
mode.
mode.
The operation of steps 4 and 5 must be done on both
playing and recording VCRs at the same time.
Press PLAY to start dubbing.
Press PAUSE/STILL
to start dubbing.
Playing VCR starts playback.
DECK starts recording.
Press STOP to stop dubbing.
Press STOP to stop dubbing.
•
To Monitor
Dubbing
on TV
1 Turn TV on and tune to the Recording
VCR channel (CI-I 3 or CI-I 4).
2 Set the VCR/I-V Selector on DECK to
"VCR."
• Dubbing tapes protected
with Copy
Guard will have poor quality results.
• Selecting the Input Mode
Method 1: Press INPUT repeatedly.
Channel Number*-* LINE1 *-* LINE2
Method 2: Press OH &/V.
Display will change as below.
,,,-_14-_24-_3
q
/
Press S' [
(CABLE) (TV))
Press •
",,_"_LINE2_-_LINE1_--_125
or 69_"_2'
• %1" or "L2" lights up on Multi Function
Display
(about 4 seconds)
when LINE1 or LINE2 is selected.
• LINE1:
For rear audio/video
connection.
LINE2:
For front audio/video
connection.
Caution: I Unauthorized exchanging and/or copying of copyrighted recordings may be_
copyright infringement.
J
Please note that some tapes cannot be dubbed on DECK. Also, it is not
possible to dub DVD/Video CD/CD to VHS tapes using DECK.
35
Advertisement
