Sony TRINITRON KV-20M20 Service Manual page 10

4 Move the cursor to 1 or 2 and press CHANNEL BLOCK
RETURN. Pl. CH
§ Press A+ or Y- to select the channel
that you want to block. Press
RETURN.
& Repeat steps 4 and 5 to enter the
second channel that you want to
block.
7 Press MENU to return to the TV program.
If you switch to the blocked channel, BLOCKED appears. The
screen is black and the sound is muted.
CHANNEL BLOCK
>1. CH 10
2. CH.
MENU
Select the channel.
Use Y { RETRY Exit feu]
To cancel a CHANNEL BLOCK setting
1 Follow steps 1-4 above.
Z Press RESET.
Selectin Ca
Vision O tio
Caption Vision options include CC1, 2, 3, and 4, or TEXT1, 2, 3,
and 4, CC1, 2, 3, and 4 show a caption or printed version of the
dialog or sound effects of a program. CC1 will be the setting for
most programs. TEXT1, 2, 3, and 4 show text information on half
of the screen. This text is not usually related to the program.
4 Press MENU.
2 Press A+ or V- to
select [CC/TEXT: CC1] and (x) VIDEO
press RETURN. Fry beeen
\y ENGLISH
3 Press A+ or V- to select the caption type (CC1, 2, 3, 4, or
TEXT1, 2, 3, or 4) and press RETURN.
4 Press MENU to return to the TV program.
% To view Caption Vision, press DISPLAY several times until
Use Yi ET Exit Feu)
CC1, 2, 3, 4, or TEXT1, 2, 3, 4 ON is displayed if broadcasting.
The caption will appear in a few seconds.
6 To turn off Caption Vision, press DISPLAY until DISPLAY OFF
appears.
Notes
* Captions disappear for a few seconds when you press the MUTING
button.
* Captions may appear with a white box or other errors if you have poor
reception of the channel.
Customizing the Channel Number Buttons
(CHANNEL GUIDE)
SEER RN
You can assign up to 12 of your favorite channels to Channel Guide
locations and switch to them with the Channel Guide.
4 Press MENU.
2 Press A+ or V- to select SET UP and press RETURN.
4 Press A+ or V- to select CHANNEL GUIDE and press RETURN.
13
4 Press RETURN again to move the
cursor to the number pad.
5 Press A+ or V-to select a
number on the Channel Guide
(the button number will turn
red) and press RETURN.
The turns red.
Buttons 0-9, DISPLAY (D) and
ENTER (E) are available for
Channel Guide access.
& Press A+ or V- to select the
channel that you want to assign
to that button, and press
RETURN.
The TV will switch to that channel.
7 Repeat steps 5-7 to set other channels.
8 Press MENU to return to the current TV program.
To remove a CHANNEL GUIDE setting
4 Repeat steps 1-6 to select the channel that you want to
remove.
2 Press RESET.
Using the Channel Guide.
4 Press CH GUIDE.
The Channel Guide shows button
numbers and the channels
assigned to them.
2 Press 0-9, DISPLAY or ENTER on
the remote control to switch to
the channel you want to view.
3 To cancel the CHANNEL GUIDE display without selecting
a channel, press CH GUIDE again.
CHANNEL GUIDE
@s @10 O13
@14 ©--- @---
@--- @--- @---
©--- O--- ©---
Listening with Headphones an Earphone
Plug the headphones or earphone into the jack on the front of
the TV. Using headphones will turn off the sound to the TV
speakers. KV-13M20 is shown below.
eg
* To prevent hearing damage due to sudden or prolonged excessive
volume, do not set the volume too high while listening.
* Ifyour TV is monaural, the monaural sound will be heard from both
headphones.
14
-~10-
sauoydpesy. ym Buiusist] e APIND joUUeYD « UOISIA UOIde>