Sony TRINITRON KV-20M20 Service Manual page 12

H.V. remains in the CRT even after the power is :
disconnected.
© Coil band
To avoid electrical shock before attempting to \ @ A board
remove the anode cap, discharge CRT: Short |
between anode and CRT coating earth ground P : a :
Step. Tension spring ie y
@ C board
@ Deflection yoke
© Four tapping screws (5)
@ Anode cap
Coating earth
ground strap
Cushion
* REMOVAL OF ANODE-CAP
NOTE: Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon
painted on the CRT after removing the anode.
* REMOVING PROCEDURES
OF
Anode button
* HOWTO HANDLE AN ANODE-CAP rection of the arrow ©.
(@ Don't damage the surface of anode-caps with
sharp shaped material!
@ Don't press the rubber so as not to damage the
inside of anode-caps. A material fitting called a
shatter-hook terminal is built into the rubber cap.
@ Don't turn over the foot of rubbercap. The shat-
ter-hook terminal will stick out or damage the
rubber cap.
-~12-