Lightframe For Windows - Philips 107B30 Service Manual

Introduction
Philips LightFrame™ feature enriches the experience of pictures and
video on a Philips CRT (picture tube) monitor. This highlighting is done
by boosting the brightness and sharpness on a selected region of the
monitor screen. Since high brightness and sharpness are not preferred
for most standard Windows applications, this special feature will only be
active in certain circumstances. So that you can control these
circumstances, a special program and icons will be installed in your
Windows operating systems.
Notes
Philips LightFrame™ will only work with monitors that have been built to
use this software. Earlier Philips monitors or other manufacturers'
monitors will not work with this special software. It is recommended that
you install this software only on a Philips monitor designed to use it.
These monitors can be identified by the LightFrame™ logo
on the front of the monitor.
This software is not designed for use with LCD flat screen monitors.
LightFrame™ will work with true Windows-based programs and DOS-
based programs that operate in a Window's environment. It will not
work with DOS-based programs operating only in a DOS environment.
Definitions
The following list contains definitions for frequently used words.
Highlighted window:The selected window on which LightFrame™
is active.
Highlighted area: The selected rectangle (area) on which
LightFrame™ is active.
Compatibility
This version of LightFrame™ is compatible with
Windows 95
Windows 98
Windows NT
Windows 2000 Professional Edition.
Language Selection
While English is the default language of LightFrame™, the User Interface
can be set up to operate in Dutch, French, German, Italian, Portuguese,
or Spanish.
Installation
1) To install LightFrame™, place the CD in the CD-ROM drive.
2) Next, when the menu of items on the CD appears on your screen,
click on 'Install LightFrame™'.
3) Now, follow the on-screen prompts to properly install the program.
The software checks to see if you have a compatible monitor. You
must say yes to the license agreement for the software to install.
4) After installation, LightFrame™ automatically loads and the icon
appears in the taskbar.
Notes
LightFrame™ is installed in the Start menu, under Programs. Unless
otherwise selected during installation, LightFrame™ is installed in
"C:\Program Files\Philips\LightFrame." A shortcut is installed in the
StartUp folder and on the desktop. (If needed, LightFrame™ can be
operated manually from the StartUp folder.)
If LightFrame™ detects that your monitor is not LightFrame™ compatible,
an message appears on the monitor screen. See Error Message
number 1 under the heading Error Messages. If you see this message,
you can select to abort or continue the installation. However, if you
continue the installation, LightFrame™ will probably not work on
the monitor.
3Back

LightFrame for Windows

™
<---
<---
1. Put CD-ROM into CD-ROM Drive,
bring up Fig 1.
2. Click one of languages (for example : English)
on the screen,bring up Fig.2
3. Click LightFrame,
bring up Fig.3
4. Click Next,
bring up Fig.4
M36 107B3 GS_3
53
9 Go to cover page
Fig 1.
Fig 2
Fig 3
Fig 4
Forward4