1. Manuals
  2. Brands
  3. Philips Manuals
  4. Monitor
  5. 107B
  6. User manual

Philips 107B User Manual

17" -inch (16.0" vis) color monitor
Hide thumbs Also See for 107B:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Manual
Philips 107B Electronic User's Manual
file:///G|/manual/english/107B/index.htm [10/1/1999 4:31:50 PM]

Advertisement

Table of Contents
loading

Related Manuals for Philips 107B

Summary of Contents for Philips 107B

  • Page 1 Philips 107B Electronic User's Manual file:///G|/manual/english/107B/index.htm [10/1/1999 4:31:50 PM]...

  • Page 2: Safety And Troubleshooting Information

    When positioning the monitor, make sure the power plug and outlet are easily accessible. Consult a service technician if the monitor does not operate normally when operating instructions of this manual are followed. file:///G|/manual/english/107B/safety/safety.htm [10/1/1999 4:34:18 PM] • Troubleshooting •...

  • Page 3: Troubleshooting

    No color or intermittent color Color appears blotchy Missing one or more colors file:///G|/manual/english/107B/safety/saf_troub.htm (1 of 2) [10/1/1999 4:34:20 PM] • Troubleshooting • Regulatory Information Check these items Make sure the Power cable is plugged into the power outlet and back of the monitor.
  • Page 4 Problem with On Screen Display For further assistance, refer to the distributor. file:///G|/manual/english/107B/safety/saf_troub.htm (2 of 2) [10/1/1999 4:34:20 PM] Adjust the Brightness and Contrast controls. Check your video card and it's owner's manual instructions for it may be a non-VESA-DDC Standard card.

  • Page 5: Regulatory Information

    Electronics equipment in offices is often left running continuously and thereby consumes a lot of energy. What does labeling involve? file:///G|/manual/english/107B/safety/regs/regulat.htm (1 of 11) [10/1/1999 4:34:22 PM] • TCO Environmental Requirements •...

  • Page 6: Environmental Requirements

    The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since no substitutes are available. file:///G|/manual/english/107B/safety/regs/regulat.htm (2 of 11) [10/1/1999 4:34:22 PM] RETURN TO TOP OF THE PAGE...
  • Page 7 Time settings are adjusted from the system unit by software. From indicated inactivity to Power Saving Position A2, the total time must not be set to more than 70 minutes. NUTEK VESA State file:///G|/manual/english/107B/safety/regs/regulat.htm (3 of 11) [10/1/1999 4:34:22 PM] RETURN TO TOP OF THE PAGE PHILIPS 107B1*...

  • Page 8: Federal Communications Commission (Fcc) Notice (U.s. Only)

    To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS. file:///G|/manual/english/107B/safety/regs/regulat.htm (4 of 11) [10/1/1999 4:34:23 PM] Green Yellow Amber ®...

  • Page 9: Commission Federale De La Communication (Fcc Declaration)

    CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. EN 55022 Compliance (Czech Republic Only) file:///G|/manual/english/107B/safety/regs/regulat.htm (5 of 11) [10/1/1999 4:34:23 PM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...

  • Page 10: Vcci Notice (Japan Only)

    Please note that this device has been approved for non-business purposes and may be used in any environment, including residential areas. file:///G|/manual/english/107B/safety/regs/regulat.htm (6 of 11) [10/1/1999 4:34:23 PM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...

  • Page 11: Polish Center For Testing And Certification Notice

    A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/E-06251. North Europe Information file:///G|/manual/english/107B/safety/regs/regulat.htm (7 of 11) [10/1/1999 4:34:23 PM] RETURN TO TOP OF THE PAGE...
  • Page 12 ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. BCIQ Notice (Taiwan Only) file:///G|/manual/english/107B/safety/regs/regulat.htm (8 of 11) [10/1/1999 4:34:23 PM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...

  • Page 13: Warning! This Appliance Must Be Earthed

    Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. Information for UK only file:///G|/manual/english/107B/safety/regs/regulat.htm (9 of 11) [10/1/1999 4:34:23 PM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE WARNING - THIS APPLIANCE MUST BE EARTHED.
  • Page 14 Regulatory Information file:///G|/manual/english/107B/safety/regs/regulat.htm (10 of 11) [10/1/1999 4:34:23 PM] of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover.
  • Page 15 Regulatory Information the lead - not simply over the three wires. RETURN TO TOP OF THE PAGE file:///G|/manual/english/107B/safety/regs/regulat.htm (11 of 11) [10/1/1999 4:34:23 PM]...

  • Page 16: Other Related Information

    Use a Cord Set consisting of a minimum 18 AWG cord and grounding type attachment plug rated 15 A, 250 V. The Cord Set should have the appropriate safety approvals for the country in which the equipment will be installed and / or be marked HAR. file:///G|/manual/english/107B/safety/saf_other.htm [10/1/1999 4:34:24 PM] • Troubleshooting •...
  • Page 17 Other Documents You May Need About This Guide This electronic user's guide is intended for anyone who uses the Philips 107B Color Monitor. It describes the monitor's features, setup, operation and all other information, which is the same exact information described in our printed version.
  • Page 18 All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V. file:///G|/manual/english/107B/about/about.htm (2 of 2) [10/1/1999 4:34:27 PM] RETURN TO TOP OF THE PAGE...

  • Page 19: Product Information

    TCO92, E2000, NUTEK, EPA, FCC, CE and ISO9241 certified Technical Specifications* • Size and deflection • Dot pitch / Grille pitch • Horizontal pitch • Tube type file:///G|/manual/english/107B/product/product.htm (1 of 4) [10/1/1999 4:34:29 PM] • Automatic Power Saving • Product Views RETURN TO TOP OF THE PAGE 17 inch / 41 cm ;...

  • Page 20: White Color Temperature

    "wake up". The following table shows the power consumption and signaling of this automatic power saving features: file:///G|/manual/english/107B/product/product.htm (2 of 4) [10/1/1999 4:34:29 PM] 12.0" x 9.0" / 306 x 230 mm 12.9"...

  • Page 21: Energy Star

    * Resolution 1280 x 1024, standard size, contrast max., brightness 50%, 9300 * These information are subject to change without notice. Pin Assignment The 15-pin D-sub connector (male) of the signal cable (IBM systems): file:///G|/manual/english/107B/product/product.htm (3 of 4) [10/1/1999 4:34:29 PM] H-sync V-sync Power Used <...

  • Page 22: Front View

    Blue video ground Views Follow the links to see various views of the monitor and its components. Front View Rear View file:///G|/manual/english/107B/product/product.htm (4 of 4) [10/1/1999 4:34:29 PM] Assignment No pin Logic ground Identical output - connected to pin 10 Serial data line (SDA) H.

  • Page 23: Installing Your Monitor

    Contrast hotkey. When the UP arrow is pressed, the adjustment controls for the CONTRAST will show up. UP and DOWN buttons are used when adjusting the OSD of your monitor file:///G|/manual/english/107B/install/install.htm (1 of 3) [10/1/1999 4:34:32 PM] • PCUH411 USB Hub (option)

  • Page 24: Rear View

    BRIGHTNESS will show up. LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used in adjusting the OSD of your monitor. Rear View file:///G|/manual/english/107B/install/install.htm (2 of 3) [10/1/1999 4:34:32 PM] RETURN TO TOP OF THE PAGE...
  • Page 25 USB Port - attach your USB Upstream cable here. (Not available on all models.) Video In - this is a cable which is already attached to your monitor. Connect the other end of the cable to your PC. file:///G|/manual/english/107B/install/install.htm (3 of 3) [10/1/1999 4:34:32 PM] RETURN TO TOP OF THE PAGE...
  • Page 26 • Headphone connection • Microphone in/out • Includes • Dimension • Power consumption Description of the Controls file:///G|/manual/english/107B/install/mm_pede/mm_inst.htm (1 of 3) [10/1/1999 4:34:34 PM] • Description of the Controls 2 x 1.5W RMS / 36W PMPO 3.5 mm jack 3.5 mm jack Audio cable and AC adapter 9.4"...
  • Page 27 6G3B10 Multimedia Base (option) Installing your Multimedia Pedestal file:///G|/manual/english/107B/install/mm_pede/mm_inst.htm (2 of 3) [10/1/1999 4:34:34 PM] Attach your microphone here. Connect this to the audio output of your PC. Connect this to the microphone output of your PC. Connect power input here.
  • Page 28 6G3B10 Multimedia Base (option) file:///G|/manual/english/107B/install/mm_pede/mm_inst.htm (3 of 3) [10/1/1999 4:34:34 PM] 2. To UN-INSTALL Lift the back hook from the hole on the bottom plate of your monitor. Slide out the pedestal the opposite direction (from when you installed it).
  • Page 29 Front View • Rear View • Installing your USB Hub Installing your USB Hub file:///G|/manual/english/107B/install/usbhub/usb_inst.htm (1 of 2) [10/1/1999 4:34:38 PM] Installing on a conventional base. Take out the USB hub from the box. Take off the USB hub cover.
  • Page 30 USB Hub (Optional Feature) file:///G|/manual/english/107B/install/usbhub/usb_inst.htm (2 of 2) [10/1/1999 4:34:38 PM] RETURN TO TOP OF THE PAGE Position the USB hub to the back of the Multimedia Pedestal. Attach the USB hub by sliding-in to the Multimedia base.

  • Page 31: On-Screen Display

    On the front controls of your monitor, once you press the Controls window will pop up and you can now start making adjustments to your monitor's various features. Use the or the file:///G|/manual/english/107B/osd/osddesc.htm (1 of 4) [10/1/1999 4:34:42 PM] • The OSD Tree •...
  • Page 32 Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments. file:///G|/manual/english/107B/osd/osddesc.htm (2 of 4) [10/1/1999 4:34:42 PM] RETURN TO TOP OF THE PAGE...
  • Page 33 On-Screen Display file:///G|/manual/english/107B/osd/osddesc.htm (3 of 4) [10/1/1999 4:34:42 PM]...
  • Page 34 On-Screen Display RETURN TO TOP OF THE PAGE file:///G|/manual/english/107B/osd/osddesc.htm (4 of 4) [10/1/1999 4:34:42 PM]...
  • Page 35 CONTRAST To adjust your screen's contrast, follow the steps bellow. Contrast is the difference between the light and dark areas on the screen. A 100% contrast is recommended. file:///G|/manual/english/107B/osd/osd_cont.htm (1 of 25) [10/1/1999 4:34:46 PM] • The OSD Tree •...
  • Page 36 1) Press the button on the monitor. The MAIN CONTROLS window appears. LANGUAGE should be highlighted. 2) Press the button again. The LANGUAGE window appears. file:///G|/manual/english/107B/osd/osd_cont.htm (2 of 25) [10/1/1999 4:34:46 PM] RETURN TO TOP OF THE PAGE button and after three...
  • Page 37 . . . to continue to INPUT SIGNAL SELECTION, press the Smart SIGNAL SELECTION is highlighted. Next, follow steps 3 - 5 under INPUT SIGNAL Help SELECTION..to exit completely, press the file:///G|/manual/english/107B/osd/osd_cont.htm (3 of 25) [10/1/1999 4:34:47 PM] button until INPUT button...

  • Page 38: Input Signal Selection

    INPUT B or INPUT A. 5) Press the button to confirm your selection and return to the MAIN CONTROLS window. CLOSE file:///G|/manual/english/107B/osd/osd_cont.htm (4 of 25) [10/1/1999 4:34:47 PM] RETURN TO TOP OF THE PAGE (Not available in all models)
  • Page 39 The MAIN CONTROLS window appears. 2) Press the button until ZOOM is highlighted. 3) Press the button. The ZOOM window appears. file:///G|/manual/english/107B/osd/osd_cont.htm (5 of 25) [10/1/1999 4:34:47 PM] button until ZOOM is highlighted. Next, follow button RETURN TO TOP OF THE PAGE...
  • Page 40 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST HORIZONTAL is highlighted. file:///G|/manual/english/107B/osd/osd_cont.htm (6 of 25) [10/1/1999 4:34:47 PM] button RETURN TO TOP OF THE PAGE button until ADJUST...
  • Page 41 4) Press the button to move the image to the left or right. 5) When the position is adjusted, press the to highlight ADJUST SIZE. file:///G|/manual/english/107B/osd/osd_cont.htm (7 of 25) [10/1/1999 4:34:47 PM] button to return to MAIN CONTROLS window, or press the...
  • Page 42 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST VERTICAL is highlighted. file:///G|/manual/english/107B/osd/osd_cont.htm (8 of 25) [10/1/1999 4:34:47 PM] button. button to return to MAIN CONTROLS window. CLOSE MAIN button RETURN TO TOP OF THE PAGE...
  • Page 43 4) Press the button to move the image up or down. 5) When the position is adjusted, press the to highlight ADJUST SIZE. file:///G|/manual/english/107B/osd/osd_cont.htm (9 of 25) [10/1/1999 4:34:47 PM] button to return to MAIN CONTROLS window, or press the...
  • Page 44 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST SHAPE is highlighted. file:///G|/manual/english/107B/osd/osd_cont.htm (10 of 25) [10/1/1999 4:34:47 PM] button. button to return to MAIN CONTROLS window. CLOSE MAIN button RETURN TO TOP OF THE PAGE...
  • Page 45 107B The OSD Controls 3) Press the button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted. 4) Press the button. The SIDE CURVE window appears. PINCUSHION should be highlighted. file:///G|/manual/english/107B/osd/osd_cont.htm (11 of 25) [10/1/1999 4:34:47 PM]...
  • Page 46 BACK TO MAIN WINDOWS will be highlighted. 9) Press the button to return to the MAIN CONTROLS window, or press the SIDE ANGLES is highlighted. file:///G|/manual/english/107B/osd/osd_cont.htm (12 of 25) [10/1/1999 4:34:47 PM] button. button to highlight BALANCED or press the button.
  • Page 47 The MAIN CONTROLS window appears. 2) Press the button until ADJUST SHAPE is highlighted. 3) Press the button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted. file:///G|/manual/english/107B/osd/osd_cont.htm (13 of 25) [10/1/1999 4:34:47 PM] button twice.
  • Page 48 The SIDE ANGLES window appears. TRAPEZOID should be highlighted. 6) To adjust the trapezoid, press the 7) When the trapezoid is adjusted, press the button to return to the ADJUST SHAPE window. file:///G|/manual/english/107B/osd/osd_cont.htm (14 of 25) [10/1/1999 4:34:47 PM] button. button to highlight PARALLELOGRAM or press the...
  • Page 49 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST SHAPE is highlighted. file:///G|/manual/english/107B/osd/osd_cont.htm (15 of 25) [10/1/1999 4:34:47 PM] button. button to return to the ADJUST SHAPE window. button twice. button until ROTATE...
  • Page 50 The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted. 4) Press the arrow until ROTATE IMAGE is highlighted. 5) Press the button. The ROTATE IMAGE window appears. ROTATE should be highlighted. file:///G|/manual/english/107B/osd/osd_cont.htm (16 of 25) [10/1/1999 4:34:47 PM]...

  • Page 51: Adjust Color

    1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ADJUST COLOR is highlighted. file:///G|/manual/english/107B/osd/osd_cont.htm (17 of 25) [10/1/1999 4:34:47 PM] button. button to return to the ADJUST SHAPE window. BACK TO button twice.
  • Page 52 5500K for PHOTO RETOUCH, or USER PRESET. 5) Once you have highlighted GENERAL USE, IMAGE MANAGEMENT, or PHOTO RETOUCH, press the button to confirm you selection and return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. file:///G|/manual/english/107B/osd/osd_cont.htm (18 of 25) [10/1/1999 4:34:47 PM]...

  • Page 53: Reset To Factory Settings

    TO FACTORY SETTINGS..to exit completely, press the RESET TO FACTORY SETTINGS file:///G|/manual/english/107B/osd/osd_cont.htm (19 of 25) [10/1/1999 4:34:47 PM] button to highlight RED. Next, press the button to highlight GREEN. Next, press the button to highlight BLUE. Next, press the button to confirm your adjustments and return to button.
  • Page 54 YES or NO. NO is the default. YES returns all settings to their original factory adjustments. 5) Press the button to confirm your selection and return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. file:///G|/manual/english/107B/osd/osd_cont.htm (20 of 25) [10/1/1999 4:34:47 PM]...
  • Page 55 The MAIN CONTROLS window appears. 2) Press the button until EXTRA CONTROLS is highlighted. 3) Press the button. The EXTRA CONTROLS window appears. DEGAUSS will be highlighted. file:///G|/manual/english/107B/osd/osd_cont.htm (21 of 25) [10/1/1999 4:34:47 PM] button. RETURN TO TOP OF THE PAGE button until EXTRA...
  • Page 56 The MAIN CONTROLS window appears. 2) Press the DOWN CURSOR button until EXTRA CONTROLS is highlighted. file:///G|/manual/english/107B/osd/osd_cont.htm (22 of 25) [10/1/1999 4:34:47 PM] button. Your screen will be degaussed, then the MAIN button until EXTRA CONTROLS is...
  • Page 57 3) Press the button. The EXTRA CONTROLS window appears. DEGAUSS will be highlighted. 4) Press the button until ADJUST MOIRE is highlighted. 5) Press the button. The ADJUST MOIRE window appears. HORIZONTAL will be highlighted. file:///G|/manual/english/107B/osd/osd_cont.htm (23 of 25) [10/1/1999 4:34:47 PM]...
  • Page 58 BACK TO MAIN CONTROLS will be highlighted. After returning to MAIN CONTROLS . . . Smart . . . to exit completely, press the Help file:///G|/manual/english/107B/osd/osd_cont.htm (24 of 25) [10/1/1999 4:34:47 PM] button. button to highlight VERTICAL. button. button to return to the EXTRA CONTROLS window.
  • Page 59 107B The OSD Controls CLOSE MAIN CONTROLS RETURN TO TOP OF THE PAGE file:///G|/manual/english/107B/osd/osd_cont.htm (25 of 25) [10/1/1999 4:34:47 PM]...

  • Page 60: Customer Care And Warranty

    Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY TO READ THE WARRANTY COVERED: WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • Switzerland •...
  • Page 61 F1rst Choice Warranty Your International Philips F1rst Choice Warranty Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing or using this product, please contact Philips directly to benefit from your Philips F1rst Choice Warranty.

  • Page 62: F1Rst Choice Contact Information

    F1rst Choice Contact Information F1rst Choice Contact Information Telephone numbers: 0660 311 657* Austria 0800 735 75 Belgium 0809 22 56 Cyprus 808 800 50 Denmark 0800 901 703 France 0800 181 7143 Germany 00800 3112 1223 Greece 0800 113 125 Finland 1 800 553 154 Ireland...

  • Page 63: Your International Guarantee

    International Guarantee Your International Guarantee Dear Customer, Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and replacement parts irrespective of the country where it is repaired during a period of 12 months from date of purchase.

  • Page 64: Consumer Information Centers

    Consumer Information Centers Consumer Information Centers Antilles ¥ Argentina ¥ Australia ¥ Czech Republic ¥ Dubai Korea ¥ Malaysia ¥ Mexico Philippines ¥ Poland ¥ Russia Uruguay ¥ Venezuela Eastern Europe CZECH REPUBLIC Philips Service V Mezihorí 2180 00 Prage Phone: (02)-6831581 Fax : (02)-66310852 HUNGARY...
  • Page 65 Consumer Information Centers TURKEY Türk Philips Ticaret A.S. Talatpasa Caddesi No 5. 80640-Gültepe/Istanbul Phone: (0800)-211 40 36 Fax : (0212)-281 1809 Latin America ANTILLES Philips Antillana N.V. Kaminda A.J.E. Kusters 4 Zeelandia, P.O. box 3523-3051 Willemstad, Curacao Phone: (09)-4612799 Fax : (09)-4612772 ARGENTINA Philips Antillana N.V.
  • Page 66 Consumer Information Centers COLOMBIA Industrias Philips de Colombia S.A.-Division de Servicio Calle 13,No 51-39 Apartado 4282, Bogota Phone: (01)-6235511/ 9800-18971 (toll free) Fax : (01)-6234399 MEXICO Consumer Information Centre Norte 45 No.669 Col. Industrial Vallejo C.P.02300, -Mexico, D.F. Phone: (05)-3687788 / 9180050462 Fax : (05)-7284272 PARAGUAY Philips del Paraguay S.A.
  • Page 67 Consumer Information Centers VENEZUELA Industrias Venezolanas Philips S.A. Apartado Postal 1167 Caracas 1010-A Phone: (02) 2377575 Fax : (02) 2376420 Canada CANADA Consumer Service Division. 4977 Levy Street Ville St.Laurent, Quebec H4R2N9 Phone: (514)-9560120 Fax : (514)-9560828 Pacific AUSTRALIA Philips Consumer Service. Customer Information Centre.
  • Page 68 Consumer Information Centers BANGLADESH Philips Service Centre 100 Kazi Nazrul Islam Avenue Kawran Bazar C/A Dhaka-1215 Phone: (02)-812909 Fax : (02)-813062 CHINA BEIJING Beijing Authorized Service Centre. Consumer Information Centre Building 6, West Street Chong Wen Men, Beijing, Jin Bang Co. Led. 100051 BEIJING Phone: (010)-65122276 Fax : (010)-65226236...
  • Page 69 Consumer Information Centers HONG KONG Philips Hong Kong Limited Consumer Information Centre 16/F Hopewell Centre 17 Kennedy Road, WANCHAI Phone: 2821-5345 Fax : 2861-3104 INDIA BOMBAY Philips India Customer Relation Centre Bandbox House 254-D Dr. A Besant Road, Worli Bombay 400 025 Phone: (022)-4926611 Fax : (022)-4941698 CALCUTTA...
  • Page 70 Consumer Information Centers JAPAN Philips Consumer Electronics 1-11-9,Ebisuminami Shibuya-Ku Tokyo 150 Phone: (03)-3719-2235 Fax : (03)-3715-9992 KOREA Philips Korea Ltd. Philips House C.P.O. box 3680 260-199, Itaewon-Dong. Yongsan-Ku, Seoul 140-202 Phone: (02)-5961195/1196 / (02)-5967632/76325 Fax : (02)-5959688 MALAYSIA Philips Malaysia Sdn. Berhad Service Dept.
  • Page 71 Consumer Information Centers PHILIPPINES Philips Electronics and Lighting Inc. 106 Valero St., Salcedo Village Makati, Metro Manilla. Phone: (02)-8100161 Fax : (02)-8173474 SINGAPORE Philips Singapore Private Ltd. Consumer Service Dept. Lorong 1,Toa Payoh., P.O. box 340 Singapore 1231 Phone: 3502000 Fax : 2508037 TAIWAN Philips Taiwan Ltd.
  • Page 72 Consumer Information Centers SOUTH AFRICA South African Philips. S.V. Div. 195 Main R.D. Martindale., Johannesburg P.O.box 58088 Newville 2114 Phone: (011)-4715000 Fax : (011)-4715034 Middle East DUBAI Philips Middle East B.V. Consumer Information Centre P.O.Box 7785 DUBAI Phone: (04)-353666 Fax : (04)-353999 EGYPT Philips Egypt Consumer Information Centre...
  • Page 73 United States Guarantee LIMITED WARRANTY (Computer Monitor) Three Years Free Labor / Three Years Free Service on Parts / One Year Exchange* *Product will be exchanged with a new or renewed to original specifications unit within two business days for the first year. This product must be shipped in at your expense for service during years two and three. WHO IS COVERED? You must have proof of purchase to receive warranty service.
  • Page 74 United States Guarantee Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available). Where CAN I GET MORE INFORMATION? For more information, contact the Philips Customer Care Center by calling customers only) (903) 242-4804.
  • Page 75 United States Guarantee Philips Customer Care Center, P. O. Box 2976, Longview, TX 75601 Your International Philips F1rst Choice Warranty Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing or using this product, please contact Philips directly to benefit from your Philips F1rst Choice Warranty.
  • Page 76 A special construction of connector used in some monitors with higher horizontal scanning frequency. The BNC connection can provide the optimum shielding and matching characteristic impedance of video signal path to ensure the best video performance. file:///G|/manual/english/107B/glossary/glossary.htm (1 of 18) [10/1/1999 4:35:09 PM] R S T U V W X Y Z...

  • Page 77: Color Temperature

    Convergence error is expressed in mm often at three well-defined points on the screen, designated A, B and C (see figure ). Also known as misconvergence. file:///G|/manual/english/107B/glossary/glossary.htm (2 of 18) [10/1/1999 4:35:09 PM]...
  • Page 78 Philips proprietary monitor control software that allows users to control parameters (e.g., Size, Color, Geometry) using software running in Windows. CustoMax is compatible with existing VGA cards. See CrystalClear FAQ and USB Bay FAQ. DDC (Display Data Channel) file:///G|/manual/english/107B/glossary/glossary.htm (3 of 18) [10/1/1999 4:35:09 PM] RETURN TO TOP OF THE PAGE...

  • Page 79: Digital Control

    It is currently available in most Philips monitors. Dot pitch The shortest distance between two phosphor dots of the same color on the screen. The smaller the dot pitch, the better the resolution of the monitor. file:///G|/manual/english/107B/glossary/glossary.htm (4 of 18) [10/1/1999 4:35:09 PM]...
  • Page 80 MPR-II defines maximum permitted electrostatic, magnetic and electric field levels measured at a distance of 50 cm from the center of the monitor (see table). file:///G|/manual/english/107B/glossary/glossary.htm (5 of 18) [10/1/1999 4:35:09 PM] RETURN TO TOP OF THE PAGE...
  • Page 81 The unit of frequency named after the physicist Heinrich Hertz (1857-1894). 1 hertz (Hz) is equal to 1 cycle/second. Horizontal dot pitch See Dot pitch. Horizontal scanning frequency file:///G|/manual/english/107B/glossary/glossary.htm (6 of 18) [10/1/1999 4:35:09 PM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
  • Page 82 50 Hz means a picture (or frame) frequency of 50 Hz. At any given resolution, non-interlaced modes are preferable to interlaced modes; however, generation of non-interlaced modes is more expensive. file:///G|/manual/english/107B/glossary/glossary.htm (7 of 18) [10/1/1999 4:35:09 PM] RETURN TO TOP OF THE PAGE...

  • Page 83: Line Frequency

    Currently, there are two areas of interest: very-low frequency (VLF) electric and magnetic fields extending from 2 kHz to 400 kHz, and extreme low frequency (ELF) fields extending from 5 Hz to 2 kHz. See also Electromagnetic radiation standards. file:///G|/manual/english/107B/glossary/glossary.htm (8 of 18) [10/1/1999 4:35:09 PM] RETURN TO TOP OF THE PAGE...
  • Page 84 This practice is occasionally necessary because some video cards generate a video pattern that is smaller than the visible file:///G|/manual/english/107B/glossary/glossary.htm (9 of 18) [10/1/1999 4:35:09 PM] RETURN TO TOP OF THE PAGE...
  • Page 85 The number of pixels that can be written in a video line per second. Pixel rate See pixel frequency Plug-and-Play See DDC. See USB section. file:///G|/manual/english/107B/glossary/glossary.htm (10 of 18) [10/1/1999 4:35:09 PM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...

  • Page 86: Refresh Rate

    The feature that allows users to adjust the whole screen rotating to be horizontal. Because of the magnetic field of earth, the screen of monitor will be tilt when the screen faces toward the different direction. Screen coatings file:///G|/manual/english/107B/glossary/glossary.htm (11 of 18) [10/1/1999 4:35:09 PM] RETURN TO TOP OF THE PAGE...
  • Page 87 0.5%. ARAS also has a major advantage over other screen treatments: It doesn't diffuse or scatter reflected light, so picture contrast and sharpness remain completely unimpaired. It's also easy to clean and tough enough to withstand commercially available cleaning agents. file:///G|/manual/english/107B/glossary/glossary.htm (12 of 18) [10/1/1999 4:35:09 PM]...

  • Page 88: Self-Test Function

    Self-test function A monitor equipped with hardware or software to automatically detect cable connection status. Shape Deviation of a reproduced picture from its intended shape. The following types of distortion are most common: file:///G|/manual/english/107B/glossary/glossary.htm (13 of 18) [10/1/1999 4:35:09 PM]...

  • Page 89: Tilt Function

    2. Composite sync: Horizontal and vertical sync pulses mixed into a single signal train. 3. SOG: Horizontal and vertical sync pulses mixed, then combined with the green color signal. See Electromagnetic radiation standards. Tilt function file:///G|/manual/english/107B/glossary/glossary.htm (14 of 18) [10/1/1999 4:35:09 PM] RETURN TO TOP OF THE PAGE...
  • Page 90 Each downstream port can be individually enabled and configured at either full or low speed. The hub isolates low speed ports from full speed file:///G|/manual/english/107B/glossary/glossary.htm (15 of 18) [10/1/1999 4:35:09 PM] RETURN TO TOP OF THE PAGE...
  • Page 91 Upstream ports receive downstream data traffic. UPS (Universal Power Supply) The monitor with UPS feature can work in different countries with various mains voltage. file:///G|/manual/english/107B/glossary/glossary.htm (16 of 18) [10/1/1999 4:35:09 PM] RETURN TO TOP OF THE PAGE...
  • Page 92 VGA, introduced by VESA in 1991, offers a top resolution of 1024 x 768 pixels (non-interlaced) and a refresh rate slightly higher than IBM's XGA 8514A. High-end, graphics adapters, introduced over the last three years for professional workstations, offer top file:///G|/manual/english/107B/glossary/glossary.htm (17 of 18) [10/1/1999 4:35:09 PM]...
  • Page 93 For example, the VIS of a 17-inch monitor is only about 16 inches. It depends on the useful screen size of CRT and the opening of a monitor's front cabinet. file:///G|/manual/english/107B/glossary/glossary.htm (18 of 18) [10/1/1999 4:35:09 PM] RETURN TO TOP OF THE PAGE...

This manual is also suitable for:

107b20107b10107b13

Table of Contents