Table of Contents
Advertisement
CHANGING PCS ALERT TIMING
(1) Press "
" or "
(MID).
(2) Press "
or
setting screen is displayed.
(3) Press "
or
the desired setting. Each time it is pressed, the response to the PCS warning
timing changes as shown above.
(4) Press "
" to go back to the menu.
Note: PCS is enabled each time the vehicle is turned on. The system can be
disabled/enabled and the alert timing of the system can be changed.
(Alert timing only, brake operation remains the same.)
DISABLING PRE-COLLISION SYSTEM (PCS)
(1) Press "
" or "
(MID).
(2) Press "
or
setting screen is displayed.
(3) Press "
or
select the desired setting.
(4) Press "
" to go back to the menu.
Note: The system is enabled each time the vehicle is turned on.
Refer to the Toyota Owner's Manual for additional information on PCS w/PD
operation, settings adjustments, limitations, and precautions before attempting to
use it.
" switches and select "
" switches and select "
" switches and select "Sensitivity" and then press "
" switches and select "
" switches and select "
" switches and select "PCS on/off" and then press "
Middle
Far
(default)
" from the Multi-Information Display
(PCS)" and then press "
" from the Multi-Information Display
(PCS)" and then press "
47
Near
." The
" to select
." The
" to
Advertisement
Table of Contents
