Sony HANDYCAM DCR-HC52 Operating Manual page 56

TrssNsshsstisS/Ssstisssd)
You cannot dub correctly using the
A/V connecting cable.
• The A/V connecting cable is not connected
properly. Make sure that the A/V
connecting cahle is connected to the input
.jack of another device for dubbing a picture
from your camcorder (p. 44).
New sound added to a recorded tape
is not heard.
• Adjust [AUDIO MIX] until the sound is
heard appropriately (p. 36).
Pictures from connected devices are
not displayed correctly.
• The input signal is not NTSC (p. 59).
The computer does not recognize
your camcorder.
• Install the "Picture Motion Browser"
(p. 49).
• The computer may not recognize your
camcorder l_)r a l)w mOlllents after you
connect it. Wait for a while.
• Disconnect USB devices other than the
keyboard, the mouse, and the camcorder
from the _ (USB) jack on the computer.
• Disconnect the cable fiom the computer
and canlcorder, restart the comptlter_ then
comlect them again correctly.
You cannot install the supplied
software, "Picture Motion Browser,"
on a Macintosh computer.
• You can install "Picture Motion Browser"
only on a Windows computer.
Depending on the functions, you may not
be able to use them together. The following
list shows examples of functions that
cam_ot be used at the same time.
backlight [SPOT METER],
[EXPOSUREI
]SPOT FOCUS] [SCENE SEL.]
[SPOT METER] NightShot plus
[SCENE SEL.] NightShot plus
[EXPOSURE] NightShot plus
[WriT BALI NightShot plus
56