Sony HANDYCAM DCR-HC52 Operating Manual page 45

fO Notes
• When you are connecting your cat]]corder to _t
II'_OllaUrill &',ice, connect tim yellow plug of tile
A/V connecting cable to the video input jack,
and tile red !right channel) or the white (lell
channel) plug to the audio input jack on the
device.
• When you connect a device via an A/V
connecting cable, set [DISP O UT] to [LCD] (the
del,mlt setting) (p. 43).
4
/ Prepare your camcorder for
playback.
Insert the recorded cassette.
Slide the POWER switch repeatedly to
turn on the PLAY/EDIT lamp.
2
Insert the recording media in the
recording device.
If your recording device has an input
selector, set it to the appropriate input
(such as video inputl, video input2).
3
Connect your camcorder to the
recording device (VCR or DVD/
HDD recorder) with the A/V
connecting cable (supplied) [_,
an A/V connecting cable with S
VIDEO (optional) [] or an i.LINK
cable (optional) [_.
Connect your camcorder to the input
.jacks of the recording device.
+4
_1, Start playback on the camcorder,
and recording on the recording
device.
Refer to the operating instructions
supplied with your recording device for
details.
5 When dubbing is complete, stop
your camcorder and the
recording device.
fO Notes
• To record tile date/time and camera settings data
when connected by tim A/V colmecting cable,
display them on the screen (p. 34).
• The Jollowing cannot be output via the _, DV
]ntelt_ce (i.L]NK):
Indicator',
Pictures edited using [P EFFECT] (p. 38)
• Wllen connected using an i.LINK cable, the
recorded picture becomes rough wllcn a picture
is pau_d on your eamcorder while recording.
• When connected using an i.LINK cable, data
code (datekime/ctmlcra _ttings data) may not
be displayed or recorded depending on the
device or al)plication.
1::3
=
g
45