PROEL SESSION 1 FREE User Manual page 6

signal level.
12. MASTER
This potentiometer sets the general level of all signals send to the internal speaker amplifier.
13. USB SLOT
This slot is where you can insert an USB FLASH DRIVE containing audio files.

Preferably use only reliable memories (suggested brands are: SanDisk, Kingston, Lexar, Verbatim).
14. SD SLOT
This slot is where you can insert a SD MEMORY CARD containing audio files.
15. MODE SWITCH
Pressing this switch, you can select the source containing audio files between SD, USB or external
Bluetooth player device. A small icon on the display identifies the source currently used:
SD MEMORY CARD
USB FLASH DRIVE
BLUETOOTH DEVICE

To connect a Bluetooth device, follow these instructions:
•
Press MODE one or two times until the
•
If the Bluetooth symbol
the loudspeaker (a previously associated device will be relinked automatically).
• If the Bluetooth symbol in the display is flashing, there is no device associated.
• To associate a new device (smartphone, tablet, pc or other) you must turn on the Bluetooth
in your device.
•
On the device in the list of Bluetooth devices a new device named "SESSION1" will appear
and a tone will be reproduced by the loudspeaker,
• To associate it to your device choose it and if the linking is successful another tone will be
reproduced by the loudspeaker.
•
Now you will see "SESSION1" in the list of your recognized Bluetooth devices on your
smartphone or tablet and you are ready to play music with it using your preferred app.
NOTE: the audio file types and quality playable with Bluetooth connection depends on the Bluetooth
device used. The Bluetooth connection range is about 10 m (33 feet).

How to link two loudspeakers with STEREO LINK: the STEREO LINK function allows you to play stereo
tracks on two SESSION1 loudspeaker linked together. The MASTER loudspeaker will reproduce the
left channel and the SLAVE loudspeaker will reproduce the right channel.
• The MASTER loudspeaker must be already linked with your Bluetooth device with the
procedure described above.
•
Turn on the SLAVE loudspeaker and press its MODE button until the display shows:
•
Then press the STEREO LINK button on the SLAVE loudspeaker and the display will show:
•
Wait a few moment (5 to 10 seconds) until the Bluetooth symbol
meaning that the connection is established between the SLAVE and the MASTER. A double
6
in the display is steady on, your device is associated and linked to
text appears.
on the display is steady,