Table of Contents
Advertisement
3
4
5
MC32K7055KT_TC_DE68-04387K-00_EN.indd 33
3. Select the appropriate power level by
turning the Multi Function Selector Dial
until the corresponding output power is
displayed (600, 450, 300, 180, 100 W).
At that time, press the Multi Function
Selector Dial to set the power level.
•
If don't set the power level within
5 seconds, Automatically changes to
the cooking time setting stage.
(Default : 600 W)
Result:
The following indications are
displayed:
(Microwave & Hot
blast combi mode)
180 °C
(Temperature)
4. Select the appropriate temperature by
turning the Multi Function Selector Dial
(Temperature : 200-40 °C).
At that time, press the Multi Function
Selector Dial to set the power level.
•
If don't set the temperature within
5 seconds, Automatically changes to
the cooking time setting stage.
(Default : 180 °C)
5. Set the cooking time by turning the
Multi Function Selector Dial.
•
The maximum cooking time is
60 minutes.
6. Press the START/+30s button.
6
Switching the beeper off
You can switch the beeper off whenever you want.
1. Press the START/+30s and STOP/ECO
1
2
2. To switch the beeper back on, press the
Result:
Combination cooking starts.
The oven is heated to the
required temperature and
then microwave cooking
continues until the cooking
time is over. When it has
finished.
1) The oven beeps 4 times.
2) The end reminder signal
will beep 3 times (once
every minute).
3) The current time is
displayed again.
button at the same time.
Result:
The oven does not beep to
indicate the end of a function.
•
The following indications are
displayed.
START/+30s and STOP/ECO button again
at the same time.
Result:
The oven operates normally.
•
The following indications are
displayed.
English 33
2/24/2016 2:13:19 PM
Advertisement
Table of Contents
