Table of Contents
Advertisement
Setting the time
When power is supplied, "88:88" and then "12:00" is automatically displayed on
the display.
Please set the current time. The time can be displayed in either the 24-hour or 12-
hour notation. You must set the clock:
•
When you first install your microwave oven
•
After a power failure
NOTE
Do not forget to reset the clock when you switch to and from summer and winter
time.
1
2
3
4
5
6
7
MC32K7055KT_TC_DE68-04387K-00_EN.indd 13
1. Press the Multi Function Selector Dial.
2. Turn the Multi Function Selector Dial to
set time display type. (12H or 24H)
3. Press the Multi Function Selector Dial to
complete the setup.
4. Turn the Multi Function Selector Dial to
set the hour.
5. Press the Multi Function Selector Dial.
6. Turn the Multi Function Selector Dial to
set the minute.
7. When the right time is displayed, press
the Multi Function Selector Dial to start
the clock.
Result:
The time is displayed
whenever you are not using
the microwave oven.
Cooking/Reheating
The following procedure explains how to cook or reheat food.
IMPORTANT
ALWAYS check your cooking settings before leaving the oven unattended.
Open the door. Place the food in the centre of the turntable. Close the door. Never
switch the microwave oven on when it is empty.
1. Press the Microwave button.
1
2. Turn the Multi Function Selector Dial
2
Result:
The following indications are
displayed:
(Microwave mode)
700 W
(Output power)
until the appropriate power level is
displayed.
At that time, press the Multi Function
Selector Dial to set the power level.
•
If don't set the power level within 5
seconds, Automatically changes to
the cooking time setting stage.
English 13
2/24/2016 2:13:14 PM
Advertisement
Table of Contents
